Replies to This Discussion

Permalink Reply by Dan Sleep on February 5, 2012 at 7:42am

We do have this group which might be what you are looking for:

http://www.cigarboxnation.com/group/specialtoolseitherboughtorhomemade

• ▶ Reply

Permalink Reply by Charlotte Henry on February 5, 2012 at 8:37am

Thanks, don't recall seeing that one.  I know where I'm going next.

• ▶ Reply

Permalink Reply by Wes "I'm Baaaaack" Yates on February 5, 2012 at 8:09am

Yep. that will work fine. Also you will want to have a waterstone. Woodcraft sells a double sided that is great. Get one and learn how to use it.

Oh and use water not oil. Water will float the residue out as opposed to let it hang in solution.

http://www.woodcraft.com/Product/2000242/1424/Combination-Waterston...

-WY

• ▶ Reply

Permalink Reply by Wes "I'm Baaaaack" Yates on February 5, 2012 at 8:25am

Actually this is the one I have, not the one linked:

http://www.woodcraft.com/Product/2000242/1421/Combination-Waterston...

-WY

• ▶ Reply

Permalink Reply by JUJU on February 5, 2012 at 7:51pm

the biggest problem i find that people have with new chisels is they think they come ready to use ! - well the end is nice and sharp but it will not last long at all if a Honing Guide is not used to Grind  a second angle - Grinding / Honing the second steeper angle still gives a razor sharp cutting edge to the Chisel but it makes the actual cutting edge last a lot longer and prevents chips in the cutting edge that you tend to get if you try to cut some hardwoods without first honing in your new Chisels

• ▶ Reply

Permalink Reply by Slowpaw Steve T on February 6, 2012 at 1:32am

Like they say look after your tools and they will look after you! (-:

• ▶ Reply

Permalink Reply by Bad Wolf on January 18, 2013 at 12:54am

just be sure not to stab yourself in the stomach on accident once your chisel is sharp! speaking from experience here, bad idea

• ▶ Reply

Permalink Reply by Slowpaw Steve T on January 18, 2013 at 6:43pm

like my Dad used to tell me, always cut away from you ! (- ;

• ▶ Reply

Permalink Reply by Bad Wolf on January 20, 2013 at 3:46pm

yep pretty much. i was bearing down on a chisel and it slipped and went straight into my gut. luckily the angle was such that it didnt go very deep

• ▶ Reply

Permalink Reply by Wes "I'm Baaaaack" Yates on January 20, 2013 at 4:21pm

Ok, you know that little voice that says "If you keep your hand there, you will put that chisel into your palm"? I heard that voice for real. Guess what? I put the chisel into my palm. I such a dummmmass.

-WY

• ▶ Reply

Permalink Reply by Busyhands Slim on January 20, 2013 at 4:49pm

FWIW, I have found that shaping a neck with a chisel is much easier (for me) than using a draw knife. I like the control I have with a chisel, and that I don't feel with a draw knife.

Is that what the rest of you use chisels for?

• ▶ Reply

Permalink Reply by Wes "I'm Baaaaack" Yates on January 21, 2013 at 2:21am

One technique I learned from O'Brian Luthiers videos on Youtube is to use a spokeshave in combination with chisels. Use the spokeshave to work the profile of the neck (D-shape the length of the neck) and chisels to cut the heel if applicable. I have a blog post Here.

-WY

• ▶ Reply

• ‹ Previous
• 1
• 2
• Next ›
• Page