I'm still too new and excited in this endeavor, so I haven't been able to solidify a "procedure" and standard for myself. This has probably been covered in depth before and if so, please point me in the right direction. I keep getting stuck on what order to build and assemble the parts of the neck. Is it preferable to glue and finish the neck/bridge then cut the fret slots, mount the frets before finishing, etc. I like the idea of doing the frets last, but one bad cut and a lot of work goes down the drain. if I wait to spray the finish last, then I get lacquer over the frets, and I don't like that either. What's the best way?
Tags:
Personally, I finish the neck& headstock by taping off the fretboard...I oil my fretboard as a finish after the frets are in...I've also began finishing my bridge before mounting it so as to allow moving it for setting intonation...sure those with more experience will chime in soon.
I guess it's whatever works best for you. I like to like to shape the neck, then layout & cut frets in the fretboard, then inlay the dots and sand the board to 1000g. Next, I use double-stick tape to attach the heel & the fboard to the neck for alignment/sanding. Then I take the thing apart, install the frets on the fboard, level/bevel/crown. Then glue the whole thing up: First the neck to the box, then the fboard (with the top taped off to keep the glue from getting all over it) and finally the heel. Then final clean-up/sanding of the neck to 600 or 1000g,and a wipe down with mineral spirits. To finish, I bag the box, tape-off everything but the neck, and finish with 5-6 coats of Deft gloss spray lacquer. When the neck is dry, I remove all masking, tape off the fboard between the frets and polish each fret with a piece of 1000g sandpaper wrapped around a rubber eraser. To finish the fboard... if it is maple, it gets tung oil, anything else gets lots of olive oil, then buffed with a rag. ...Man, now that I think about it, that sure sounds like a lot of work. I wonder why I even bother. :-)
i usually mark up the neck according to the box i'm using, cut the headstock and box cut-down depth, glue the fretboard on in the right position before shaping and finishing the neck the next day.
The slots are then marked out and cut and frets added. Then filed and dressed and ready to glue to the box, it is much easier to work on the neck before it is attached to the box.
I spray lacquer the box first to avoid messing it up during construction, and spray lacquer the neck attached to the box, frets and all, before mounting the neck hardware.
Will be making a "how to make a cigar box guitar" video in the next few weeks! (-:
Started by Bill Andy in Performances, How to Play, Lessons, Concerts 13 hours ago. 0 Replies 0 Likes
Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Bill Andy 14 hours ago. 5 Replies 0 Likes
Started by BrianQ. in Performances, How to Play, Lessons, Concerts on Tuesday. 0 Replies 2 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray Apr 26. 8 Replies 1 Like
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by Southern Ray Apr 26. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. Apr 25. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango Apr 22. 4 Replies 0 Likes
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!