I'm about to start on my 3rd CBG. The first was a fretted acoustic/electric and a great success, but someone bought it from me almost right away. My second was a tinkering project that was slide Coffee Can Resonator and sounds much like a banjo. I'm still experimenting with that one to explore different components.
My 3rd build is a Casa Torano acoustic/electric (piezo) with brass fittings that is going to be my personal to display and practice on. On this I have a question. Is there an Ideal thickness for the fret board? I'm using 1/4" Cocobolo on a 3/4" X 1-1/2" Poplar neck. It just seems too thick but I don't want to start shaving it (the fretboard) down before I get some input.
Tags:
I've used 1X2 oak for my necks, 3/4"X1-1/2" actual measurement and 1/4" oak for the finger boards and it seems to work out good. I think that is pretty much standard practice.
I've used 1/4" before too. That seems to work out ok for a CBG. The reason it seems thick is because they're not radiused. Radiusing would make the edges thinner, so the fingerboard would appear thinner. The neck is narrow enough that radiusing is not necessary.
You could experiment with making it thinner, but I would not personally do it unless I had a way of keeping it very flat - i.e., a power planer or a very large hand plane. Then a long straight edge to check it against.
When I'm making fingerboard blanks, I try to slice them to a 1/4-inch, which gets me two out of a piece of 1x. You can definitely make them thinner (I have) but then you tend to run dangerously short on space for adding side dots. Also, the thicker (higher) fboard allows for a little more wiggle room at the bridge/saddle, especially helpful if you are integrating a piezo into the bridge.
Thanx Everyone. 1/4" does seem to make it easier, since most of the exotics and the big box boys all carry this size and short of planing and radius, nothing needs to be done! I'll be posting my finished build pretty soon, I'm working on the saddle (Cocobolo), bridge & nut (both bone) and laying out the frets. Strange, I don't know how to play, but I love the sound they make. I just seem to get lost in the woodworking. It's definitely a labor of love!
Yep. 1/4": is the way to go!
Started by Bill Andy in Performances, How to Play, Lessons, Concerts 16 hours ago. 0 Replies 0 Likes
Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Bill Andy 16 hours ago. 5 Replies 0 Likes
Started by BrianQ. in Performances, How to Play, Lessons, Concerts on Tuesday. 0 Replies 2 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray Apr 26. 8 Replies 1 Like
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by Southern Ray Apr 26. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. Apr 25. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango Apr 22. 4 Replies 0 Likes
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!