Replies to This Discussion

Permalink Reply by Dan Sleep on May 30, 2012 at 5:55am

Lots of stuff works. Eyelets (like used in shoes), pop rivets with the center nail thingy knocked out work the best in my opinion. Get rivets that have a little longer shaft on them so it will help them to resist the tendency to lean when the string pulls against it.

Nipples from bicycle rims work good too. Lots of them on eBay.

• ▶ Reply

Permalink Reply by Gary Deemer on May 30, 2012 at 8:48am

cut a slot with a hacksaw just in front of your string holes and cut a piece of coat hanger to fit . done

• ▶ Reply

Permalink Reply by Penny Nelson on May 30, 2012 at 9:32am

My franken dulcimer has the plastic tube off stripped electrical wire - threaded onto the string.

• ▶ Reply

Permalink Reply by Slowpaw Steve T on May 30, 2012 at 7:34pm

Pop rivets with the nail removed work for me, get a pack of various sizes..use two rivets for each string

http://www.ebay.co.uk/itm/50-4-8-x-14mm-OPEN-TYPE-DOME-HEAD-ALUMINI...

 

 

• ▶ Reply

Permalink Reply by Evan Zadd on May 31, 2012 at 2:37am

I just got some last night. They work great! Thanks for the advice

• ▶ Reply

Permalink Reply by John Davidson on May 31, 2012 at 5:27am

How about string ferrules?

 

John

• ▶ Reply