Replies to This Discussion

Permalink Reply by Clock The Wolf on May 5, 2012 at 2:00pm

How about a 4 string tenor guitar set up primarily for fretting combined with a 3 string baritone set up mainly for slide?

Oh sure, some smart-ass too-clever-for-their-own-good type will probably ask why you don't just do a 6 strung heavy on top and light on the bottom, but that misses the point of maximizing the potential, which is the true origin of the double neck: think of a 12 string combined with a 6 string baritone.

For a cbg, it could be a 3 course double string combined with a 2 string, the double stringer with 26, 16, 12 and frets, the 2 stringer with 61, 49 and fretless

• ▶ Reply

Permalink Reply by Uncle John on May 5, 2012 at 2:27pm

Clock, I would want versatility.   I use the DGB for finger fretting and do better with that than a 4 string.   But yes, I end up with two open G tunings one kind of baritone and one kind of tenor. 

Brick, you went the double neck route for the same reason I am considering it.  Do you have any photos?  I will go look.  I am not ready to build yet-- but what would you advise on separation distance between the necks?   And is it best to go with the same scales?

• ▶ Reply

Permalink Reply by Uncle John on May 5, 2012 at 2:30pm

Brick, that double of yours is really cool.  I was thinking about similar distance between the necks.  Like the idea of joining the headstocks.  Man, that git looks right for you and your music..    But it is too flashy for me. 

• ▶ Reply

Permalink Reply by Clock The Wolf on May 5, 2012 at 3:22pm

• ▶ Reply

Permalink Reply by Clock The Wolf on May 5, 2012 at 9:33pm

• ▶ Reply

Permalink Reply by Clock The Wolf on May 6, 2012 at 2:14am

• ▶ Reply

Permalink Reply by Ron "Oily" Sprague on May 5, 2012 at 5:37pm

John,

 

You have a legitimate need. Form follows function, and all that crap. Build it. Just don't end up like these guys:

 

 

THAT would be flashy!

• ▶ Reply

Permalink Reply by Paul Stephen Eklund on May 5, 2012 at 5:57pm

I think that guitar doubles as a head board for a twin bed. LOL

Uncle John, Double neck guitars were always meant to serve an on stage need. Not really a flash thing. make a lowbo and 3 string or 4 and 3 string combo. This would make it easy to use both for different tunes or within the same song. 

• ▶ Reply

Permalink Reply by the anonymous pick on May 5, 2012 at 6:14pm

well ... diatonic and reg  scale  would be a fuctional  use ,

 

but  hey  .. what do i know  ?   function and flash works for me  too    ;-)

 

• ▶ Reply

Permalink Reply by The Phrygian Kid on May 5, 2012 at 9:00pm

Do a four string incorporating both tunings in one. Work on ur playin til u can do it all on the one axe. Meantime, devise a mechanical mute for strings one and four ;) yes, double necks are for poseurs...

• ▶ Reply

Permalink Reply by Keni Lee Burgess on May 5, 2012 at 11:29pm

I have never owned a double neck, although I could see an advantage.

For me a 3 and 4 string would be interesting.

If the 3 string had a longer 27" scale using baritone strings, I would tune GDg. This would be my bass.

The 4 string with a 22" scale, I would tune Open G (Dgbd) for rhythm chords and lead/bottleneck. The 4 string would be closer to the floor (3 over 4).

This is one ideas, but there are certainly other configurations that would be very useful.

Junior Brown surely does a magically job with his...

http://youtu.be/x_wLVCLPx0M

Good discussion. Thank you. Enjoy, Keni Lee      

• ▶ Reply

Permalink Reply by Clock The Wolf on May 6, 2012 at 12:06am

Some notable players of non-gimmick doubleneck guitars are: Earl Hooker, Don Felder, Steve Howe, Jimmy Page, Pete Townshend, Steve Vai, Junior Brown, Geddy Lee, Chris Squire, John Lodge, Richie Sambora, Slash, Dave Mustaine, to name just a few. But you should keep in mind that they are all just fourth-rate poseurs...

• ▶ Reply

• ‹ Previous
• 1
• 2
• 3
• …
• 5
• Next ›
• Page