Replies to This Discussion

Permalink Reply by The Phrygian Kid on April 12, 2012 at 11:05am

Any of the hardwoods for the box and cedar for the lids. Get a dovetail jig and go crazy

• ▶ Reply

Permalink Reply by Swamp Dawg Primal Music on April 12, 2012 at 11:17am

gonna start just simple corner gluing. one step at a time... i've got a low tool budget and no power in the workshop, all manual tools.

• ▶ Reply

Permalink Reply by Swamp Dawg Primal Music on April 13, 2012 at 2:51am

Top thickness 2-3 mm?

• ▶ Reply

Permalink Reply by Lonman on April 12, 2012 at 12:25pm

*** nice choices ***

• ▶ Reply

Permalink Reply by Ron "Oily" Sprague on April 13, 2012 at 4:20am

Vecchio,

Any of those woods will make a lovely box. I agree with the Kid, unless you can also get spruce, cedar is a fabulous, warm-sounding soundboard wood. Yep, 2 mm is perfect for soundboard and bottom thickness; you can go a bit thicker for sides, if you want. For box making, you can glue up butt ends at first, but learning how to finger joint makes an even nicer look. You can make a finger joint jig pretty easily, and even a simple coping or hobby hacksaw can be used to cut finger and dovetail joints. I would also make some 2.54 cm square corner posts out of silver fir to tighten up the box, gives you something to screw the lid into, and maple or cherry for your necks. But that's just me.

• ▶ Reply

Permalink Reply by Swamp Dawg Primal Music on April 13, 2012 at 5:25am

Thanks, I'm getting stuff from Filbo, as per your research. They're pretty cool, they're tripping out on the CBG thing! I'll do butt ends for now, but finger joints don't seem too hard, I'll try em with silver fir boxes for crow-style first, so I don't piss good money away learning on expensive wood (about €20/box). For now I'll decoupage some borders over the butt joints, to give the boxes some pizzaz, though I'll limit covering the wood. I think it'll be: 2mm spruce (or cedrela, I think it's cedar, if Filbo recommends it) for the top and back, 5mm olive for the sides, glued on bottom, hinged top. I think the 5mm sides will give me plenty of strength for the glued joints, so I won't need corner posts, but I'm gonna try everything with cheap silver fir and build a few crow-style to display in rehearsal spaces and tattoo shops in the area.

Today was my first sale, as soon as I finished the guitar! The Fuente on my profile! Got 3 more to build, of which 2 will be for sale.

• ▶ Reply

Permalink Reply by Ron "Oily" Sprague on April 13, 2012 at 8:43am

Glad you and Filbo finally got together, and it's hoopy they're diggin' your CBG effort. Cedar and olive should make a nice combo. 5 mm should be plenty thick for sides. Silver fir may surprise you; though cheap, it's in the same family as spruce, and could give you really nice tone. Congrats on the sale. Post pics and vids when you get a few done; we wanna hear 'em!

One reason I mentioned the corner posts is that when I glued up my first unbraced boxes out of 3 /16" lauan plywood, they were rather, hoom, bendable. The corner posts stiffened them up some, and then I added inner frame rails, and wow, that stiffened everything up, and the boxes' tone really woke up. Mine are 12 x 10.5 x 3 3/4", for reference. Smaller dimension boxes may not require any internal bracing.

• ▶ Reply

Permalink Reply by Swamp Dawg Primal Music on April 13, 2012 at 10:01am

Maybe I'll give corner posts a shot, the first nice box will be for me. The fir I get is cheap crap from the horrible big hardware stores here, I tried building a box for a crow and turned it into a stomp box. I'll get cheap thinner plies, and Filbo sells acoustic fir. I was thinking more or less standard "A4" page size, more or less 20X30cm, 5cm deep, that way I can print a page and decoupage it on if I want.

I'll upload when I can play something that doesn't embarass me. You can always download my punk CD's with my band Ruggine HC, available gratis on punk4free.org, though it's not exactly blues.

• ▶ Reply

Permalink Reply by Ron "Oily" Sprague on April 13, 2012 at 5:17pm

Kewl! I'll check it out!

• ▶ Reply