Replies to This Discussion

Permalink Reply by GI Junker on August 26, 2010 at 8:57am

glued new headstock on, it deff wasn't easy but I made it wider than my last and it has given me more cosmetic options..will post pics when done

• ▶ Reply

Permalink Reply by Micah Haley on August 26, 2010 at 12:00pm

It won't be pretty but...

I looks like you just need a small shim under that tuner so it has a flat surface to mount to.

That way it wont warp when you tighten the screws.

Kartereo said:

it will just bend again because of how I shaped the neck

Diane in Chicago said:

Can't you just put on a new tuner? Is it not tightening because the tuner is bent and the gears no longer work?

• ▶ Reply

Permalink Reply by GI Junker on August 26, 2010 at 7:04pm

yeah that was my first thought but I wound up cutting the headstock off all together, my goal was to build something aesthetically pleasing.

Micah Haley said:

It won't be pretty but...

I looks like you just need a small shim under that tuner so it has a flat surface to mount to.

That way it wont warp when you tighten the screws.

Kartereo said:

it will just bend again because of how I shaped the neck

Diane in Chicago said:

Can't you just put on a new tuner? Is it not tightening because the tuner is bent and the gears no longer work?

• ▶ Reply

Permalink Reply by GI Junker on February 29, 2012 at 6:26pm

Ok so here it is 2012 feb 29 and I solved my issue I cut the headstock off and did a scarf joint. Three yrs ltr it is still holding up. Conclusion......scarf joint if done correctly can hold the strain of four stringer.

• ▶ Reply

Permalink Reply by JUJU on March 1, 2012 at 12:08am

i was going to leave a reply then i noticed i was 2 yers too late lol !

• ▶ Reply

Permalink Reply by GI Junker on March 1, 2012 at 5:32am

Thanks anyway, thought that counts right

• ▶ Reply

Permalink Reply by South Paw,Davey on March 1, 2012 at 6:16am

I would take some wood from the back of the head till the tuner will sit flat. Looking at the pictures it would not take alot and you could re finish it. You would never know. Scarf joints are great when you have the neck free and before caving square and flat so to say. When carved I would find it hard to cut and get the other angle to match up. you only need 3 to 5 mill off. Sand it back and save your self a lot ot time and pain. Then play that baby!

Dave

• ▶ Reply

Permalink Reply by Bluesheart on March 2, 2012 at 3:55am

Maybe you could just put a shim or spacer under the tuner and use a longer screw to use it as it is? Or just remove that tuner and use it as a 3 stringer. You could fill the hole or use it as a hanger!

• ▶ Reply

• ‹ Previous
• 1
• 2
• Next ›
• Page