Hey there fellow CBN plunkers, strummers and sliders,

I'm getting ready to construct a 3-string cigar box guitar with a humbucker pickup. I'm really fascenated with the fretless fingerboard and have heard upright bassists produce warm single note passages in jazz music. And it occurred to me that maybe I don't need any actual, raised, metal frets, just fret markings on the upper side of my guitar neck. I'm also planning on using a slide more and more as I really want to get into that and learn the technique. I've played guitar most of my life and am so used to frets but would appreciate any feedback on whether actual metal frets are all that necessary... especally for a 3-stringer!

J.D. Woods

Views: 92

Reply to This

Replies to This Discussion

A 3 string slider is fretless, but the higher action will take more pressure to fret notes without the slide? I suggest building both fretless & fretted to figure out which one is best for your playing style?

https://www.cigarboxguitar.com/knowledge-base/how-to-make-a-simple-...

Here’s a video, if you’re not into lengthy reads? 
https://www.cigarboxguitar.com/knowledge-base/how-to-build-a-cigar-...

 Hello JD, welcome. I'm a fifty year failed six-string player that got into building and playing fretless one, two and three-stringers. Been at it for seven years. I've built roughly 20 3-string, four or five two-stringed, (chugger) guitars and about a dozen or so diddley bows of various types, canjos, tin-jos, etc. and nary a fret in (my) home-built guitar world. I was able to learn to build and play them, (somewhat) well enough that my wife and I are able to entertain ourselves. I have little doubt, with your experience, you'll do well.

 I play using a slide and also finger-style on the fretless neck. You get used to it. For slide, I set the string height just a bit higher than normal, .020 inch or so. I have one slick walnut that has a very low string height that I play sometimes with a slide. It has an odd, but kinda cool tone with a slide that works with some kinds of music. Experiment, ask around here, play and have fun. It's addictive. Don't say you haven't been warned. (grin)

Any other questions, just ask. 

        Ray

 J.D. If the HTML doesn't work, try the other.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

Copper Hardware

Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray 15 minutes ago. 11 Replies

Nut

Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Taffy Evans yesterday. 6 Replies

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

Latest Activity

Southern Ray replied to Bill Andy's discussion Copper Hardware
"Taffy makes good points. I have no experience either with the paint, but I have a bunch of 50+ year…"
15 minutes ago
Doug Thorsvik posted a video

California Dreaming: 3D Printed Cigar Box Guitar

Cigar Box Guitar Slingers - Spokane, 201st Zoom Mtg 05/06/24. Only 1-finger chords, free songbooks here: https://www.cbgslinger.com/download CBG Songbook.pdf...
2 hours ago
Uncle John commented on Ghostbuttons's photo
Thumbnail

2 night project

"Very nice.  A clean and handsome fretless."
3 hours ago
Uncle John commented on Wanhavihtahousu's photo
Thumbnail

IMG_5132

"Those look great!"
3 hours ago
Uncle John commented on Wanhavihtahousu's photo
Thumbnail

IMG_5132

"Cool!"
3 hours ago
Sam Tringali is now a member of Cigar Box Nation
3 hours ago
A.D.EKER commented on AGP #'s photo
Thumbnail

AGP #533 - ''Beware of Wife''

"Thats a Beauty Alan whit the found riverwood and the Sign! i can hear it allready tearing it up!"
4 hours ago
Korrigan replied to Bill Andy's discussion Copper Hardware
"Did you click my link?  I'm seeing  lot of options."
5 hours ago
Mick Tickner commented on Mick Tickner's photo
Thumbnail

cbg2.4

"Ah so it's called a wing, thanks for that Doug.  And a bit ratty is exactly the look I…"
5 hours ago
Taffy Evans replied to Bill Andy's discussion Copper Hardware
"Hi, there is copper based paint available, and it actually creates a patina over time. I have not…"
9 hours ago
Wanhavihtahousu posted photos
9 hours ago
Ghostbuttons posted a photo

2 night project

Lots going on here. 22 inch scale, GDg. It’s made out of scrap. The neck is a bit of oak finish…
12 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->