Replies to This Discussion

Permalink Reply by darryl kernaghan on March 16, 2017 at 3:43pm

Brent , this is for a single piezo, but 2 in parallel you just connect both reds together, same with the blacks, in series, you join red of piezo 1 to black of piezo 2 or vice versa---http://handmademusicclubhouse.com/photo/piezo-volume-jack?context=a...

• ▶ Reply

Permalink Reply by Brent Kasl on March 17, 2017 at 1:31am

so to verify before soldering, the second piezo follows the same red/black as the first both going to the pot?

• ▶ Reply

Permalink Reply by Brent Kasl on March 17, 2017 at 2:41am

I am using both a jack and volume control
Both piezo reds are together and both blacks
Do they both go to pot now?
Jack and pot are already wired together
I am adding the two discs

• ▶ Reply

Permalink Reply by darryl kernaghan on March 17, 2017 at 3:18am

Yes Brent, just join them to the pot as in the diagram, as if they were a single piezo

• ▶ Reply