#1 resource for Cigar Box Guitars, Free Plans, How-To, Parts & More!

First 4 strings build progress

I really started working on it.

I cut the box to fit the neck on both ends.
Will then decide on how I do the headstock, make it, then will glue the freboard.

I want to keep it simple, but do what it needs to play well and sound good.

More to come

1 member likes this

Attachments:

image.png, 906 KB

▶ Reply to This

Replies to This Discussion

Permalink Reply by Gilles C. Caron on September 18, 2016 at 11:47am

Thanks... I must say that I like the idea...

If I had to build another 6 strings guitar, I would do that. But I already have too many guitars and bodies waiting for a build, all Teles.

But maybe that I will do that with a cheap neck that I have, and add the bottom part, like a traveler guitar, and try some add-ons.

But for now, a 4 string is more what I need. Having a choice of bodies is a plus...

▶ Reply

Permalink Reply by Paul Craig on September 18, 2016 at 7:01pm

That's cool.

You could make a 3 string neck to change out with the 4 string or maybe a 4 string short scale bass neck all in the same box.

Or keep the good working neck and switch to different boxes. Deep acoustic box or Reso box.

▶ Reply

Permalink Reply by Gilles C. Caron on September 18, 2016 at 9:51pm

I have a solid body in mind...

▶ Reply

Permalink Reply by Gilles C. Caron on September 20, 2016 at 7:09am

I finally decided to glue the neck to the box yesterday.

Today, I did the same with the lower part of the top board.

Btw, "Don't throw away you old credit or ID cards..." I use them when I clamp a board that I don't want to leave a mark.

I also decided to add some electronics to the Flatpup. So, I will install a ModBoard from GFS from the back, add the pots on the front, and drill 2 sound holes.
http://www.guitarfetish.com/Analog-Delay-COMPLETE-Install-kit-Cool-...

I will use it in acoustic Blues Jams, so I need some control on the sound. I could use pedals in the electric set, but it's a no-no for the acoustic part...

Ah... the real fun will begin soon. Apply the finish, adjust the nut and the bridge... and play it. Yeah!

Attachments:

IMG_3093.JPG, 773 KB

▶ Reply

Permalink Reply by Paul Craig on September 20, 2016 at 7:30am

Coming right along.

Good idea with the credit card, just remember not to put the raised lettering to the wood because it could imprint to the wood.

Good idea with the Mod Board. Thought about making a multi effect box out of several of those, would be cheaper than buying all the different effect boxes. Put a equalizer, delay, reverb, boost, distortion and overdrive all in a cigar box between the git and the amp. Use stomp switches to turn on the ones you want when you want them.

▶ Reply

Permalink Reply by Gilles C. Caron on September 20, 2016 at 7:52am

Yes, good remark about the raised lettering. I normally don't use them, but forgot to mention it.

You're right about using more than 1 effect, it would be too costly. I have many that I built for a hobby, having worked in electronics all my life. But I also bought a couple to spend less time building and more time playing, a few years before I retired. I am still not interested in playing with electronics anymore these days.

▶ Reply

Permalink Reply by Paul Craig on September 20, 2016 at 8:01am

If your retired, you'll back to it some day. Hahaha

▶ Reply

Permalink Reply by Gilles C. Caron on September 21, 2016 at 12:15pm

Today was body time. It is now all glued and sanded.

Now I need to decide where to drill sound holes, install knobs and the jack.
The body is sealed tight, and ready for the next step.
But I still need to finish the neck.

I'll have to find the best position for the sound holes, etc... for the look.

Attachments:

IMG_3101.JPG, 956 KB
IMG_3102.JPG, 899 KB

▶ Reply

Permalink Reply by Gilles C. Caron on September 21, 2016 at 4:13pm

Just wondering...

I was thinking of doing 2 holes, 1 above the neck, 1 below.

Should I use all brass? Buttons, tuners... or can I mix the colors?

There will be 2 knobs.

Hummm... questions, questions...

Attachments:

IMG_3107.JPG, 150 KB

▶ Reply

Permalink Reply by Blues Frog on September 21, 2016 at 11:19pm

You can use whatever colors you want. There are no rules. That being said, go with what you feel works.

The git is coming along nicely. Can't wait to see and hear the finished product.

▶ Reply

Permalink Reply by Gilles C. Caron on September 22, 2016 at 1:10am

Yeah, right... I forgot the "no rules" thing :-)

I'm normally too obsessed about details.

Thanks for the reminder. My wife always tells me that "I should Stop Complicating My Life" oh well...

Thanks...