People often find neat ways or different tools/items to shape the back of the neck.
I start off using a 1/2" roundover bit(3/4" on 6 string guitars) to knock off the edges and get me started. I use a rasp file(flat on one side and half round on the other), utility knife blades as scrapers, sandpaper and a cheap serrated edge steak knife as a scraper(works amazingly well).
What do you use?
Tags:
never had a good result from rasps ,i just use a spokeshave..
I am surprised that no one has mentioned a chisel.
I typically stop shapng the neck before I get it as thin as I would like just because it takes so much time with the spokeshave, block plane, rasp and sandpaper.
On my next neck, I will try a sharp chisel. Maybe even cut some small pull saw kerfs across the back of the neck to help the chiseling and prevent tearing out too much wood if I screw up.
I really want the tuner end of the neck to be pretty thin and tapered in thickness.
Haven't tried any power tools yet, as I worry about going too far or getting out of control.
Gary
It was interesting to note on yotube videos, that quite a lot of the lutheries who make spannish guitars use a chisel almost exclusibvely to shape the neck, including even the curved forms of the heel
I've seen a couple of these videos. I'm not sold on carving the neck with a chisel, but I definitely want one for the heel and headstock/neck transition. I need to save up and buy a good one though. From my experience, it's one of those tools that you get what you pay for.
1. Surform, rasp, spokeshave.
2. Cabinet scrapers.
3. Sandpaper.
I use rough rasps, then a very cheap wood shaver to get the shape I want like this...
http://www.amazon.co.uk/Stanley-Surform-Shaver-Tool-115/dp/B0001IWC...
Then sand it down to finish. Takes a while but if I go down the electric tools route I won't enjoy it anymore.
Haha
I rough out the heel with a coping saw and then use a hand held oscillating sander with 60 grit and then 220 grit to shape the heel, neck and headstock. I finish up with hand sanding with 400 and then 600. I've used maple, oak and babinga for necks and maple, oak, tiger wood, wenge and paduk for fret boards.
I have used almost every conceivable method to make my necks; draw knife, spoke shave, router, orbital sander, spindle sander, hand plane, wood rasps, etc., however, I don't know how I EVER got along without my new Dragon files from Stewmac. Finally, wood rasps in my shop that actually work like they should. Pricey, but well worth every penny.
Wow, Richey Kay, cool video. I love the idea of doing the rasp work first, then the spokeshave. I"ve been doing it backwards! Also getting that neck out in open air will really speed up the process. I guess I need a sturdier work bench.
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray on Friday. 8 Replies 1 Like
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by Southern Ray on Friday. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. on Thursday. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango Apr 22. 4 Replies 0 Likes
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Carl Floyd Mar 1. 15 Replies 0 Likes
Started by Joe in Performances, How to Play, Lessons, Concerts. Last reply by Carl Floyd Feb 29. 13 Replies 0 Likes
Started by Chance in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Feb 22. 12 Replies 1 Like
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!