Tags:
Ab,if the neck is actually bowing,that is the whole problem there,easiest fix,without destroying everything,would be just pull the frets,fill the fret slots,just at the edges,then laminate a 1/4 inch fretboard on top,that will stiffen the neck,and give you more scope for action variation by raising/lowering the bridge,plus an improved string break angle,as long as your neck is straight pre gluing that should stop the bowing,at least for the length of the fret board,2 other things to consider,why not try it as a 3 stringer,or try lighter gauge strings
I agree with Daryl. Adding a fretboard will "lower"the string height by raising the neck. I had that problem and lowered the bolt I used a nut deeper into the neck which helped. As for slide, cant help there as I have just started fooling around with one myself. Good luck.
For a quick fix, Darryl is right. A little work can salvage it fairly easily. Slide is fun, I'd encourage working with it more to get proficient. I build both types depending on whim, time, random bursts of ambition. If I'm putting a mag pup in it's likely to get frets, but it's no guarantee. Last one I finished is a baritone with a 4 pole base pup under the lid with no frets. Love that thing, sounds mean as hell. Next baritone will probably be fretted. It helps to plan out your builds as far as you can. The 3 degree kick is nice but I've only done one with the neck angled, all my others are straight as I can get them. still play just fine.
I agree with everyone else's comments. I would suggest a separate fretboard is pretty crucial for a 4 string. I have recently started using a non-adjustable mild steel rod in my 4 string necks to further reduce the risk of bowing.
On my 31st build (solid body 4 string, the one on my profile pic) I just did a straight Strat style neck joint, although I usually have some back angle. I have no complaints with how it plays.
To help in strengthening your builds I glue a piece of wood at the back end of the box for the necks back end to sit on and also adds strength for a piece of wood on the outside of the box where I put the string anchors.
On wood that is soft and bends I usually will glue a piece of scrap oak to the underside of the neck piece thats inside the box. Simple fix that seems to work well. Cheat anyway you can... :)
For strings I use the Ernie Ball super slinkies... Much lower tensions needed on builds. I also use wood nuts and bridges built from some very hard wood I have. This stuff is so hard its taken teeth out of my 1/2 blade on my bandsaw. So I file it as low as I can get away with and if I make a mistake... I take some of the sawdust that I filed, put some in my mistake and add a drop of very thin crazy glue. Problem solved.
Y'all are awesome! I did elect to take everything apart (much easier than I feared) and fixed it. I started off with a 3 degree angle (calculated height on the neck angle calculator tool I googled... nice) and set everything up. I didnt like it. neck was so thin at the body that it was bowing. I sanded it all back down and braced it with another 3/4" x 1.5" piece of mahongany glued and clamped and shaped to a heel. fret board now sits 1/4" above the body and no angle needed. i did glue two 1/2" small pieces of wood to the bottom of the box to support the rest of the neck. It is plenty strong now, no bowing, no buzz, strings are just about perfect where i like em... Lovin it. I will post some pics when i get home if anyone is interested.
Thank you all for the helpful advice!!!
Ab
good news Ab,enjoy
Feels nice when things work out well... especially so after a face palm mistake and you can fix it up right.
And yep a pic of the done deal would be nice.
Looks great.
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray on Friday. 8 Replies 1 Like
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by Southern Ray on Friday. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. on Thursday. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango Apr 22. 4 Replies 0 Likes
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Carl Floyd Mar 1. 15 Replies 0 Likes
Started by Joe in Performances, How to Play, Lessons, Concerts. Last reply by Carl Floyd Feb 29. 13 Replies 0 Likes
Started by Chance in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Feb 22. 12 Replies 1 Like
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!