I have a friend interested in a CB fiddle for his son. I think I have everything handled, but I'm not sure about the tuners. Any advice on friction tuning pegs?
Tags:
I did them on a banjo build and it was surprisingly easy with a decent reamer from Elderly and made the peg tapering jig using this guy's method. Worked out great.
I disagree with the Kid. Friction tuning pegs have been around for a very long time, and do a fine job. I've built about 4 gourd banjos with them, and they are not hard to use once you get used to them.
Ebony violin pegs cost about $2.50 each from Stew Mac, and you will need a reamer as well. Or, if you want to spend a lot of money, I hear these are a great option. http://www.pegheds.com/index.htm.
They will run you about $150 for a set of four violin pegs, so costly. I expect to use a set for a 19th century guitar I have in the planning stages.
Thanks guys. I imagine friction tuners being similar to eye-bolts excepting for the tapered hole on the former.
I may devise a way to do both with smaller geared tuners (or at least accommodations for them) slightly offset and deeper than the friction tuners. Or maybe I could glue in the friction tuners for look and gear tuners for utility. Hmmmm.
Friction tuners, even with commercial ebony pegs, will be the least costly way to go, once you buy a good quality reamer. Factor in eventual wear on the holes themselves, of course, assuming the fiddle is used a lot and not just a wall hanger. If you use a relatively soft wood for the peghead like poplar, then I think you would run into perpetual tuning issues, but with a decent hardwood, they will work fine.
And try and be as accurate as you can in drilling the string hole in the peg. Using nylgut strings, I can tune very finely for my banjos. The violin world would have abandoned friction peg tuners long ago if they were so inferior to geared tuners, I think. Same with flamingo guitars and the rest of the viol family. And I think nothing is classier looking than the simple look of ebony peg tuners. The aesthetics of a musical instrument is important to me, speaking for myself of course.
Please note i never said that friction tuners don't work. But they require maintenance and exacting fabrication and installation as you say, one will need a couple of new tools. All that said it ought be obvious that a ratio is most definitely beneficial, it substantially reduces the effort required to turn the sucker, gives you a break (ie you don't have to hold it against resistive force as you turn it), and it improves control at the same time. Yes, there are families of instruments which have not adopted them en-masse and these are the very same ones where the most collectible, valuable and desirable specimens are several centuries old and which people are of course reluctant to modify in any way. Which leads to the big-dollar no-modification necessary planetary jobbies you've linked there (I've heard good things about them too).. Also note how prevalent aftermarket fine-tuner mechanisms between the tailpiece and saddle are on violins these days, if you had geared tuners you wouldn't be adding parts at all..
I agree they look great. But if it were for me i'd have the geared ones thanks, this is a cigar box fiddle eh :) I've seen many nice folksy home made fiddles with guitar tuners.
ps.. avoid cheap planetary tuners (banjo ones basically) like the plague. If you're not paying big bucks for em then use the plain old right angle worm gear ones, cheap planetary ones will fail on you very frequently. (well this is my experience anyhow)
the best.
Thanks for the tip on the banjo type tuners. I was actually considering them as an option.
I plan to use maple for the peghead and neck. I have some nice stuff on the shelf.
After 16 fiddles, some CB and some self made boxes, I've gone back to traditional friction pegs since the geared tuners I've used in the past add unwanted weight to the end of the neck. I alway put fine tuners on the tailpiece like on the one that's on my recent vids. They're inexpensive and really help since even a properly reamed hole and tapered peg is difficult to make tiny incremental adjustments. I don't often disagree with Kid but all you have to do is look at the violin section in Symphony Orchestras all around the world to see that traditional pegs are hardly excrement. They work well but require some skill to fit them properly. Also some skill in the twist/push motion required to tune and tighten at the same time.
Awesome video Turtlehead! Got that one bookmarked. Your home made reamer has a REAL advantage. The thickness of the sandpaper wont allow you to make a loose peg. Great Job!
I have a violin with peg tuners. Took about a week to get used to using them. Also have fine tuners on tail piece. The combo works very well.
I have a luthier friend locally who is going to help me with the friction pegs and reaming. The fiddle will be 3/4 size so I have a couple Cohiba boxes that will work well, I think.
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray 18 hours ago. 8 Replies 1 Like
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by Southern Ray 18 hours ago. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. yesterday. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango on Tuesday. 4 Replies 0 Likes
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Carl Floyd Mar 1. 15 Replies 0 Likes
Started by Joe in Performances, How to Play, Lessons, Concerts. Last reply by Carl Floyd Feb 29. 13 Replies 0 Likes
Started by Chance in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Feb 22. 12 Replies 1 Like
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!