Hello nation! Some advice please...
On my latest build the 4th fret is a tiny little smidge high. When I fret the 3rd fret I get some buzz. The notes still sound they're just buzzy.
I don't want to create a cascading problem down the rest of the frets by over adjusting it...
Should I bash it or file it?
Thanks!
Tags:
Orbital sander, smooths it right down. You may need to raise the saddle a smidge also if it's that close, get the fret down first and try it.
I don't believe I would bash it Craig, have you tapped it to see if it's seated? Also check the fret cut to make sure it's deep enough and straight.
It's seated just a tiny tiny bit off. If I was keeping the guit I'd live with it. Gonna try sanding it down. It's really just barely almost imperceptibly off. But I don't want to screw it up, lol!
Thanks!
Should work fine sanding it down, I've done it and you can't tell it's been done.
Sweet. Thanks!!!! These little problems, fixes are where I'm really learning.
Oh, a little heads up Criag. depending on the grit paper you use the sander takes the fret down pretty quick so don't get too aggresive. Watch the fretboard and keep an eye on the shavings coming from the fretwire.
I also put masking tape on the first couple frets up and down the fretboard on either side of the high fret so I know if I happen to nick them.
:-)
Take a piece of hardwood and cut a narrow groove on a narrow side. Then put a piece of sand paper over a good fret with the grit facing UP. Now run that groove back and forth over the sand paper so you make a fret shaped groove in the hardwood.
Once that is done you can wrap the sand paper around the block grit facing out and use the new groove to take height off the high fret without making it flat. Tape off the fingerboard unless you want to spot sand that from your scratches.
It is fast and easy and doesn't cost $35 like a fret file. About any scrap of maple or oak will do the job really well.
For multiple high frets I use my diamond honing stone used for sharpening knives. About a half dozen passes of the 6" stone across the fretboard knocks everything down to the same level.
Some good information in here! I take all of this stuff I learn on this site and put it in my building arsenal. I like the custom sanding idea, Ed!
I was too lazy to take off the strings so I used a tiny chainsaw sharpening file to get under there and file it down. Worked quite well. It only buzzes on the G when barring a chord (cause the downward pressure isn't as much as when individually fretting.). Not much at all - in fact very forgivable.
I'll probably file it slightly more today to get it perfect.
It's a build for a charity auction. A girl a lot of us in the STL music scene know got breast and lung cancer at the same time so a bunch of bands are getting together and putting on a show. There is a big raffle and a bunch of businesses have donated as well as tattoo artists and whatnot. I am donating this guitar. So I want it to be perfect (for a given value of 'perfect' for a CBG). It's close! I love it and want to keep it. I hope whoever gets it loves it and I hope we raise a bunch of dough.
Hey Craig, I am doing the same thing to raise money for a girl I know going to Haiti to save some lives. I know the pressure you feel. Try finishing it off with some 400 grit where you filed. I also donated to a guy here in town who got shot. Got $50 bucks for the easy stick in my photos. You may want to e-bay this guitar, which is what I am going to do with the Haiti guitar. I think you'll make more money for her that way. Plus, you can tell us CBG fans about it, and maybe we will bid.
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. 15 hours ago. 4 Replies 0 Likes
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by A.D.EKER on Wednesday. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango on Tuesday. 4 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods on Saturday. 7 Replies 1 Like
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Carl Floyd Mar 1. 15 Replies 0 Likes
Started by Joe in Performances, How to Play, Lessons, Concerts. Last reply by Carl Floyd Feb 29. 13 Replies 0 Likes
Started by Chance in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Feb 22. 12 Replies 1 Like
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!