Replies to This Discussion

Permalink Reply by Clock The Wolf on January 25, 2013 at 7:19pm

What was this recommended tuning? String gauges? Scale length of build?

• ▶ Reply

Permalink Reply by Calis on January 26, 2013 at 12:28pm

Please excuse the copy pasta for my answers:

String Specs:
#1 - .022" Bronze Wound
#2 - .014" Plain Steel
#3 - .010" Plain Steel

set of 3 strings specifically for a 3-string cigar box guitar (CBG) that you want to tune in an "Open G" (GBD) or "standard guitar" (GBE - the three highest-pitch strings of a standard 6-string guitar) tuning.

String Specs:
#1 - .030" Bronze Wound
#2 - .022" Bronze Wound
#3 - .014" Plain Steel

set of 3 strings specifically for a 3-string cigar box guitar (CBG) that you want to tune in an "Open D" (D-F#-A)" tuning.

The length is 25½ inches.

• ▶ Reply

Permalink Reply by Calis on January 26, 2013 at 5:52pm

I bought a cheap set of Martin light acoustic strings and used 3, 4, and 5. I've tuned it to GDg. It was a little nerve-wracking tuning them up after the last 2 snapping on me :)  I played around with it....it is still very much a work in progress. I may end up re-raising the bridge as my pick hits the box behind the strings. Then I need to learn how to play it LOL.

• ▶ Reply

Permalink Reply by Keni Lee Burgess on January 26, 2013 at 11:56pm

Tuning is all about relativity. Possibly you will find this helpful.

Basically I use standard medium gauge strings A (45) D (35) G (26)

Tune down to GDg.

You can slowly tune up...

EBe...FCf...F#C#f#...GDg

Because the string relationships are the same 151 tones for their respective major scales, all the fingering positions are the same. The CBG just sounds in another key.

I hope this is helpful.

 http://www.ebay.com/sch/njmikeb/m.html?_nkw=&_armrs=1&_from...  

• ▶ Reply

Permalink Reply by The Phrygian Kid on January 27, 2013 at 9:42am

It's not rocket science guys. Think about a guitar, and the difference between its scale length and that of your build. If you have a regular guitar, hold your build up against it, bridge to bridge. If your nut reaches fret #4 on that guitar.. Well what pitch does each string give you at that fret? If your target pitch is somewhere exactly between two of em then go for the lower one. A guitar string can typically target a pitch two steps higher than its built for, and three below at 25".. (They have substantially less range at a shorter scale)...

• ▶ Reply