Hi guys I originally posted this in the (Performances, How to Play, Lessons, Concerts),

My bad. And MadDog responded, thanks Maddog. I'd like to know if anyone else has had a similar problem and how they rectified it.

I'm on my second CBG , on my first I used a coil pickup but on this one I decided to play around with piezo pickups. The disk I found worked very well, heaps of volume but had that annoying clattering sound, almost too sensitive. So I experimented with a  under saddle Rod pickup as I thought that these were supposed to be far Superior but to my utter dismay I can hardly get any volume out of it. It's not a crook rod because I tried several of them, purchase from C.B. Gitty. The best I can get is laying the string directly over the rod and even then the old ac30 needs to be cranked up.

See photos of bridge and saddle arrangement.

Bridge1.jpg

Bridge2.jpg

Any enlightening suggestions would be much appreciated.

Thanks in advance,

regards to all,

Walt.

Views: 1046

Reply to This

Replies to This Discussion

Custom rod piezo bridgesLet me ask you...when you cut the 1/8" plug off the end of the rod wire, are you sure you got all the strands of braided ground wire twisted up together. Cause just one touching the hot wire will shorten out the rod. Also are you using a full length rod...did you cut it short? if so that would be another problem. If your not getting a good solid contact from the saddle to the rod it`ll screw up the sound. Alot of different things could be the problem, but after using the rods for about 2 years now i still like the sound they produce alot better then the touchy disc`s. The only bridge i use the disc`s in anymore are my all bone bridges, where the disc is buried in hot glue.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

Nut

Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Taffy Evans yesterday. 6 Replies

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

Latest Activity

Doug Thorsvik posted a video

California Dreaming: 3D Printed Cigar Box Guitar

Cigar Box Guitar Slingers - Spokane, 201st Zoom Mtg 05/06/24. Only 1-finger chords, free songbooks here: https://www.cbgslinger.com/download CBG Songbook.pdf...
1 hour ago
Uncle John commented on Ghostbuttons's photo
Thumbnail

2 night project

"Very nice.  A clean and handsome fretless."
2 hours ago
Uncle John commented on Wanhavihtahousu's photo
Thumbnail

IMG_5132

"Those look great!"
2 hours ago
Uncle John commented on Wanhavihtahousu's photo
Thumbnail

IMG_5132

"Cool!"
2 hours ago
Sam Tringali is now a member of Cigar Box Nation
2 hours ago
A.D.EKER commented on AGP #'s photo
Thumbnail

AGP #533 - ''Beware of Wife''

"Thats a Beauty Alan whit the found riverwood and the Sign! i can hear it allready tearing it up!"
3 hours ago
Korrigan replied to Bill Andy's discussion Copper Hardware
"Did you click my link?  I'm seeing  lot of options."
4 hours ago
Mick Tickner commented on Mick Tickner's photo
Thumbnail

cbg2.4

"Ah so it's called a wing, thanks for that Doug.  And a bit ratty is exactly the look I…"
4 hours ago
Taffy Evans replied to Bill Andy's discussion Copper Hardware
"Hi, there is copper based paint available, and it actually creates a patina over time. I have not…"
7 hours ago
Wanhavihtahousu posted photos
8 hours ago
Ghostbuttons posted a photo

2 night project

Lots going on here. 22 inch scale, GDg. It’s made out of scrap. The neck is a bit of oak finish…
11 hours ago
BrianQ. replied to Bill Andy's discussion Copper Hardware
"Oh, yea , I forgot they have an economy line made overseas? Lace in the US did a limited edition…"
16 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->