Comment

Comment by Dave Lynas on March 16, 2017 at 8:21am

I plan on trying this Rev. I want her to move!

Comment by Gary W aka Rev. Bluejeans on February 14, 2017 at 9:48am

Something like this:

Comment by Gary W aka Rev. Bluejeans on February 14, 2017 at 9:39am

Sorry - typo.  "Wire".  So you could try routing one wire from the speaker to one terminal on the metwe, then jumper another wire (or wore, if you like!) from the other terminal back to the speaker.  I doubt anything would be damaged in such a test, though the meter may try to deflect 'backwards'.  If that's the case (or if no movement is perceptible), reverse the connections to the meter to correct the polarity.   If it were me, I'd risk it!

Comment by Dave Lynas on February 13, 2017 at 3:25pm

Thanks Maddog. I brought it to music tonight and it held it's own with 11 players. It's got a growl that cuts through and brings you out without playing loud. It's a hit.

Comment by Maddog on February 13, 2017 at 10:19am

Luv Luv Luv it Dave!!!

Comment by Dave Lynas on February 13, 2017 at 9:39am

What's a wore?

Comment by Dave Lynas on February 13, 2017 at 9:38am

The meter had a whole lotta stuff connected to it that I removed. You think I could just hook it in series with the speaker? That would be way cool. I'm Leary though. Maybe more could chime in... Thanks Gary. Thanks Pick.

Comment by the anonymous pick on February 13, 2017 at 8:32am

saaa weeeeet  . 

Comment by Gary W aka Rev. Bluejeans on February 13, 2017 at 8:11am

If it does work, I guess you could put it inline with the speaker wire - break the wore and connect one end to each terminal on the meter?  They are typically low resistance devices hooked up in series with the circuit.  It should deflect with the amplitude of the current flowing to the speaker...

BTW, this is one cool little amp!

Comment by Dave Lynas on February 13, 2017 at 6:39am

Thanks Uncle John. It was fun to make. Wish I could make the meter work. :^)

• ‹ Previous
• 1
• 2
• Next ›
• Page