A Cigar Box Nation Featured Discussion.
I am using a Macanudo paper covered box. I like the way the box looks now, I am going to use metal corner protectors. I was not going to put any finish on the box itself. Is that ok or is it preferred to put a finish on it? If it is preferred to put a finish what is the best and easiest to use?
Thanks
(Pictured below: This is what happens to an unprotected cigar box guitar that was played for two decades. -Cigar Box Nation staff)
Tags:
I'm new here and haven't even introduced myself, but I am doing a three box experiment with finishes now. I followed the instructions on the container and did the recommended sanding and recommended number of coats and drying times. They have sat drying for a week.
Polyurathane spray - I did three or four light applications. Knocking on the box feels like it has a thin, hard shell that is pleasantly resonant. Maybe the added shell over the cardboard is a little more drum-like. It is obviously not the 'raw' cigar box surface when you touch it. I got the satin finish so it is not shiny at all but looks like a finished product up close. This is the least obvious finish of the three and the easiest to apply so if you wanted to have it look natural I would do this.
Shellac - a thicker more obvious coating. I only did two coats with a wet sand between and you can see and feel that this box has a coating on it. It feels a little softer than the poly spray. This went on the smallest box and may have lowered the drum tone a bit to something pleasant. Maybe reacts more like a piece of wood than a piece of cardboard. I will have to see how shellac feels once it has cured a week. The most work to apply of the three.
Mod Podge and Polycrylic - I wanted to try a crazy thick shiny coating and this was the way to go. The box appears that it is obviously encased in something. I used the glossy version of both products. It is the most treated looking of the three. Interestingly enough, I would not call it obnoxiously shiny. It turned the box into a bass drum. Thud thud thud. I think if you added paper artwork or had to glue down a bunch of lose bits and then wanted something flashy and well encased, you be good here. The flat version of Mod Podge looks just like I remember ;)
My conclusion is that all three alternatives are just fine and if I had only any one of the three you could easily adapt it to what you like - the differentiator then is whether you pick a flat, satin, or glossy in appearance. Whether you are adding a lot of artwork. And whether you want it to feel plastic coated, shellacked or all tricked out.
Thanks for your reply. The spray poly sounds like what I may use if I put a finish on. I am wondering,my wife has some mod podge she used for some craft project. It is in a plastic jar and is brushed on. Is that how you applied it on the box,or do they have a spray type?
I went in a Blix art supply store today and saw spray Mod Podge and they make something called Super Tough now. It was $12 for a little spray bottle so I passed.
There’s vids where I see artwork Mod Podge’d into a fretboard so maybe it eventually cures very hard. The bottle says there is a 4 week cure time.
As I understand it, the regular Mod Podge isn’t for items you are going to handle a lot and they recommend covering it with poly if that’s the case.
i was thinking of trying something with watered down pva glue, aka aquadhere here. probably similar to mod podge, I've seen both used for transferring images.
I typically do not spray newer boxes, but have used poly satin spray on old ones to help protect them. Some builders spray all boxes.
MadJohnShaft - I would be interested in sing some pix of your test project.
Hi, the Shellac I am familiar with is normally very thin and runny, unless I mix it to a thicker consistency. Also it has a colour blond or orange, so consider that effect on your paper.
I would go for a spray application for a more even finish, myself.
Taff
Congratulations, Jack. Your great discussion has been added to the Cigar Box Nation FEATURES tab and will be part of today's email blast!
We've added a top photo showing what happens when no finish is placed on a paper covered box.
Thanks for the great question!!!
Maybe wipe on poly ( regular oil based poly cut 50/50 with odorless mineral spirits ) ... Or tru oil for gun stocks..
All thow the played relic looks great to me ! if it sounds as well as it looks ! its two for the price of one , But i resently found the color version first film by ELVIS Presley , and looking at it i notist how strange his guitar looked, after some ,browsing true the Net ,i found this picture
and if you look you see that the guitar body is covered whit leather and inbossed in a artistic way ,whit leaves lettering and acorns, maybee this old time vintage way of protecting your instrument is a way to reinstall tradition whit a Cigarbox guitar !! Thanks for posting kind greeeeettssszz A.D.
Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Taffy Evans 3 hours ago. 6 Replies 0 Likes
Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. 7 hours ago. 4 Replies 0 Likes
Started by BrianQ. in Performances, How to Play, Lessons, Concerts on Tuesday. 0 Replies 2 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray Apr 26. 8 Replies 1 Like
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by Southern Ray Apr 26. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. Apr 25. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango Apr 22. 4 Replies 0 Likes
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!