Replies to This Discussion

Permalink Reply by Slowpaw Steve T on February 25, 2015 at 7:07am

I have spent a lot of hours altering and perfecting this build, Slowpawcaster 2, my second attempt at a useable six string, i've made a lot of songs out of it and with the right amp sounds amazing, though can sound a little shrill in some circumstances excels in the clean end of the spectrum, even acoustic. Very easy to play due to the low action, fitted with a Strat copy neck, Strat hardware and a Flatpup six pickup, used it live once and a number of songs on "Don't Give Up the Day Job" album.

• ▶ Reply

Permalink Reply by Rob (Uker) Porras on February 25, 2015 at 7:11am

Did you make the pick up?

• ▶ Reply

Permalink Reply by Slowpaw Steve T on February 25, 2015 at 7:25am

The pickups are made by Elmar Zeilhofer of Klangbox guitars, Austria, he's a Nation member look him up ! :-)

• ▶ Reply

Permalink Reply by Slowpaw Steve T on February 25, 2015 at 7:14am

New Slowpaw Punch 2 - started out as an attempt to build a 4 string Steampunk style guitar but stopped short of adding pipes and cogs! After much adjustment the guitar plays well on clean and excels on distortion channels and loves pedals, this build was a stepping stone to perfecting the "Country Girl" build, many of which i have sold successfully, open gear tuners and key bridge, Flatpup 4 pickup, amazing tone used on a number of recordings on "Don't Give Up the Day Job" album and played live a few times last year.

sorry i cheated and posted two..... :-)

• ▶ Reply

Permalink Reply by Rob (Uker) Porras on February 25, 2015 at 7:51am

There are no rules here.

• ▶ Reply

Permalink Reply by Scott aka Farmer Ted on February 25, 2015 at 7:50am

This is #75 of my building adventure, and my favorite. It is a culmination of everything I have learned since starting my cbg building journey back in 2008. Obviously it is not a cigar box guitar. It is a solid body electric tenor guitar. It features a Sapele body, figured maple top, bolt on maple neck w/ truss rod and a neck tilt adjustment feature, a 22.875" scale Indian rosewood fretboard, MOP inlays, bone nut, though-body adjustable bridge, and handmade single coil pickups w/ zebra wood tops. The pickup routes and control cavity are shielded with copper tape.

NEck is finished with Tung oil. Body is finished with wipe on polyurethane.

Tuned DGBE with GHS Boomer strings using the .013, .017, .026, .032 strings.

The guitar weighs in at 5 lbs. and is well balanced, no neck drop.

Except for the metal parts (tuners, bridge, electronics, strings) and the MOP & nut...the rest is all hand made by me.

• ▶ Reply

Permalink Reply by Mark Lillo on February 26, 2015 at 12:14am

Beautiful guitar Scott, nice job.

• ▶ Reply

Permalink Reply by Scott aka Farmer Ted on February 26, 2015 at 12:49am

Much thanks Mark.

• ▶ Reply

Permalink Reply by the anonymous pick on February 26, 2015 at 1:26am

yup  

• ▶ Reply

Permalink Reply by Rob (Uker) Porras on February 26, 2015 at 7:07am

Wow!!!

You have some good looking lumber there.

You didn't get that at the Home Depot.

I've been thinking about doing an electric that hides the pick ups altogether.

• ▶ Reply

Permalink Reply by Jo Jacobsen on March 4, 2015 at 6:05am

How would you hide the pickups? What would that be like?

• ▶ Reply

Permalink Reply by Rob (Uker) Porras on March 4, 2015 at 10:56am

Mount them under the topboard. It would look like a plain top board . Like an acoustic guitar.

• ▶ Reply

• ‹ Previous
• 1
• 2
• 3
• 4
• …
• 15
• Next ›
• Page