The Piccolo Cigar Box Guitar - Get Mandolin & Uke Tones with 1/2 Scale Concept

I like to build instruments that will cover the full sonic spectrum.  If I'm looking for something that will cover the upper end, a simple PICCOLO cigar box guitar is the perfect solution.

  1. A piccolo cigar box guitar only has a 12.5" scale
  2. It is tuned to Open F (FCf)
  3. It's just as easy to build as a regular cigar box guitar.

Demo video:

HOW TO MAKE THIS PICCOLO CIGAR BOX GUITAR:

  • Follow our instructions for making a classic 3-string cigar box guitar
  • Instead of using a 3 foot length of poplar for the neck, only use approx. 20" section. 
  • Allow for a 12.5" scale length.  You'll need 4" for headstock and 3-4" for the neck section that falls behind the bridge.

  • If you plan on adding frets or fret markers, here are the measurements:

  • Finish the guitar as shown in the original plans.

Just remember, the simplicity of the cigar box guitar design allows for all kinds of experimentation.  Try different scales, string gauges and # of strings.  Use this concept to make baritones and even bass cigar box guitars.  The only limitation is your imagination!

Views: 8542

Reply to This

Replies to This Discussion

My attempt!
Attachments:
Nice! Did you get a similar sound? What strings and tuning did you use?
Sounds pretty good.very similar I Used ADG,tuned open F like the vid?
So are you basically an octave higher than a full scale length? Sort of like a capo at the 12th fret.

I built mine today.  It uses a bolt on neck, no frets, really high action (I'll lower it tomorrow), not even a sound hole yet.  Problem is that I forgot to learn how to play a 3 string.

anyway, I used a pack of uke nylon strings; the 4th G tuned to F for my 3rd string, the 3rd C tuned to Cfor my 2nd string, and the 2nd E tuned to f for my 1st (bottom-closest to the floor) string.  Is that right Shane?

String #3 is really floppy.

On a standard set of uke strings, that G would be tuned higher than the C and E (aka reentrant tuning.) If you tuned it low, it would really flop. They make "low G" strings that will work.

Hi from NZ, i've given it a crack, have a couple of tiny boxes so it's worked out well, nearly finished and I snuck a pick up in there as well! Great idea

Attachments:
Nice work.

Lane,

  Thanks for that info.  It may be what I am looking for.  I'll try going up an octave on the 3rd string.  I was also thinking of doing a mag PU and going to steel strings.  That could be fun.

Gary

Has anyone actually fretted one of these things?  And is it playable with those tiny frets?

It's only a half inch shorter scale than a soprano uke or a mandolin. No problem for me, though I rarely need a fret above 6 or so. Lol

Thanks, Lane.  I'll give it a go.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

Nut

Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Taffy Evans yesterday. 6 Replies

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

Latest Activity

Profile IconTimothy Peter Cooper and Sam Tringali joined Cigar Box Nation
36 minutes ago
BrianQ. left a comment for Sam Tringali
2 hours ago
BrianQ. liked Doug Thorsvik's video
2 hours ago
Southern Ray replied to Bill Andy's discussion Copper Hardware
"Taffy makes good points. I have no experience either with the paint, but I have a bunch of 50+ year…"
3 hours ago
Doug Thorsvik posted a video

California Dreaming: 3D Printed Cigar Box Guitar

Cigar Box Guitar Slingers - Spokane, 201st Zoom Mtg 05/06/24. Only 1-finger chords, free songbooks here: https://www.cbgslinger.com/download CBG Songbook.pdf...
5 hours ago
Uncle John commented on Ghostbuttons's photo
Thumbnail

2 night project

"Very nice.  A clean and handsome fretless."
6 hours ago
Uncle John commented on Wanhavihtahousu's photo
Thumbnail

IMG_5132

"Those look great!"
6 hours ago
Uncle John commented on Wanhavihtahousu's photo
Thumbnail

IMG_5132

"Cool!"
6 hours ago
A.D.EKER commented on AGP #'s photo
Thumbnail

AGP #533 - ''Beware of Wife''

"Thats a Beauty Alan whit the found riverwood and the Sign! i can hear it allready tearing it up!"
7 hours ago
Korrigan replied to Bill Andy's discussion Copper Hardware
"Did you click my link?  I'm seeing  lot of options."
8 hours ago
Mick Tickner commented on Mick Tickner's photo
Thumbnail

cbg2.4

"Ah so it's called a wing, thanks for that Doug.  And a bit ratty is exactly the look I…"
8 hours ago
Taffy Evans replied to Bill Andy's discussion Copper Hardware
"Hi, there is copper based paint available, and it actually creates a patina over time. I have not…"
11 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->