Replies to This Discussion

Permalink Reply by the anonymous pick on January 17, 2015 at 8:05pm

sure   ,  pretty  easy  to  fish pots and a  jack  through   a   sound hole  with  string    or  wire  and a  magnet  ..  ive  done   it  many times ,  usually  installing   or re-installing  one  on a   prebuilt  guit  or a  hollow-body  factory.  and yours  is a  pretty  small  box  , so  even  easier   .

if  you are talking about your initial install  .   im a bit  confused   why   you  cant   do  it  first .  

• ▶ Reply

Permalink Reply by Blake Hatton on January 22, 2015 at 8:41am

yeah, that was what I was planning on doing, but for some reason a friend of mine who's been helping and making suggestions had me convinced that I wouldn't be able to do it that way.  Thanks!

• ▶ Reply

Permalink Reply by Scott aka Farmer Ted on January 18, 2015 at 12:43am

Pick is right, it can be done that way. But you can also install your controls and pickup prior to installing the neck and closing the box, if you plan your sequences well. 

• ▶ Reply

Permalink Reply by Corbin on January 18, 2015 at 2:11pm

How about an access panel in the back of the body....

• ▶ Reply