Replies to This Discussion

Permalink Reply by Dan Sleep on April 22, 2013 at 10:45am

Put the tuners on the tailpiece instead. Put eyelets on the back side of the "headstock", and run the strings up and over the metal part.

• ▶ Reply

Permalink Reply by Rich on April 22, 2013 at 10:51am

Good thinking. Have you seen any other builds with this format. Something I could copy.

Thanks

• ▶ Reply

Permalink Reply by the anonymous pick on April 22, 2013 at 10:55am

what  dan said  ,

 or , add a  short fret board   that leaves  space  before  the pick  and    put  your tuners  there  . 

• ▶ Reply

Permalink Reply by jawbone on April 22, 2013 at 11:22am

Can't you use the hydraulics off a 9N??? There should be some chain tensioners on your manure spreader or the bale elevator???

Just funnin' with ya Rich!!  :-) Looks like a very unique build!!!

Just noticed the Iceland part! You may not have too many 9N's over there!!!

• ▶ Reply

Permalink Reply by Bluesheart on April 23, 2013 at 4:41am

Yep, I like that idea of tail mounted tuners and maybe a counter balance while you are at it?!

• ▶ Reply

Permalink Reply by Ron "Oily" Sprague on April 23, 2013 at 7:29am

Use the pick points for sympathetic harp strings.

• ▶ Reply