Replies to This Discussion

Permalink Reply by Hal Robertson on April 14, 2016 at 6:05pm

Thumbs up on the belt sander, just go easy. I knock the edges down to flush, then use a home brew fret bevel file/block.

• ▶ Reply

Permalink Reply by Jeff Sutley on April 15, 2016 at 2:21am

I bought a pair of these one eBay
ill let you know how they work
Thanks for all your advice and comments
http://www.philadelphialuthiertools.com/luthier-tools/pliers/fastca...

• ▶ Reply

Permalink Reply by Jeff Sutley on April 18, 2016 at 12:15pm

Here's a quick review I did of these pliers
http://youtu.be/rQUGM_m-zbw

• ▶ Reply

Permalink Reply by Bluesheart on April 15, 2016 at 3:50am

Thanks for the link to the cutters, just ordered , looks awesome!

• ▶ Reply

Permalink Reply by Jeff Sutley on April 15, 2016 at 3:59am

You're welcome
I should get mine today I'll try them out and let you know

• ▶ Reply

Permalink Reply by doggylv . on April 18, 2016 at 4:37am

Jeff have you tried your FastCap nippers out.....

• ▶ Reply

Permalink Reply by Jeff Sutley on April 18, 2016 at 1:51pm

Yes doggy they work great

• ▶ Reply

Permalink Reply by Mickey Ray Parker on April 15, 2016 at 7:01am

I just use a pair of flush cuts.  I have found them to work really well, and they reduce the amount of filing I have to do.

• ▶ Reply

• ‹ Previous
• 1
• 2
• Next ›
• Page