Hiiiiiiigh, action. When I first strung it up, it would bend about a quarter tone if I tried to fret up to the fifth fret, and about half way from a quarter tone to a semitone on the seventh fret.
I sawed down some grooves in the bridge for the strings to set lower, and it helped, but only a little. Now, it's about a quarter tone off at the seventh fret.
Here's my problem though. I know for a fact that this can be fixed purely at the bridge, BUT of course, it's a bridge with a built-in piezo. It's one of these cheap things from Istanbul.
http://www.ebay.com/itm/All-In-One-3-String-Cigar-Box-Guitar-Ukelel...
I don't know if you can tell, but it's two pieces of wood glued together. The shorter bit with the metal string thingies, and the base bit. So, I figure I can just cut at the bottom of the bridge or remove that base part of it, and my action will be perfect, BUT I'm worried about where that piezo is. I'm assuming that it's between the two pieces of wood, and I don't want to saw into it.
Is there a way to maybe heat it up and just take the two pieces apart without cutting into it?
Tags:
To save a too much cut - You could try a high gritt sanding on the bottom. The piezos are embedded betwixt the pieces most likely. The picture on ebay shows it being used with a fret board a bit above the box lid level, this might be the source of your problem. Action is an issue on many of my builds when I first string 'em up. you'll fix it.
Yeah, I have the fret board sticking up a little above, but in retrospect, I should have had the bottom of the fretboard flush with the lid. It would have been perfecto then, but of course, I was worried about the action being too low when I was planning that part out.
Hindsight's 20/20
Yep, that is a nice looking bridge though. Is it possible that you can add a fingerboard to the neck so the bridge will now be the right height? Or just make yourself another bridge that works on this build and build another guitar to go with the ebay bridge? You were not gonna stop at just one were you??
Oh, it already has a fingerboard with frets.
I think if I sand down the bottom, it should be fine in addition to the slots I cut out. Actually, with it sanded down, I could probably get the slots a little deeper even.
Here's a picture of it. It's missing the mag pickup because... I lost it. Also from the Istanbul peoples. I think it'll look better with a brass covered flatpup anyways.
Made a temporary bridge for the time being. Then realized the action way too high still. I bent the neck down and problem solved. It was both the bridge and the neck bowing up. I'm thinking a corner brace to force the neck down?
Angeling the neck will solve the problem, you will have to experiment how much to angle it to get just the right action. From your last post it sounds like you have done this and are on the right track.
Yeah, I'm thinking. I can physically bend the neck down, and the action is perfect as long as it's bent. I think the easiest way at this point is to have somebody bend it at the right spot and then while they're holding it down, use the corner brace to keep it in position.
I already have a block that the neck is attached to on the inside, so there's plenty to hold the corner brace in place.
Do you think this kind would be a good idea? http://www.lowes.com/pd_315692-1277-MPB120_0__?productId=3168409
Or this one? http://www.lowes.com/pd_66938-1277-MP121BC_0__?productId=3037433
Corner brace helped a bit, but thanks to Dan Sleep's video, I'm working on fixing the neck issue at it's sorce. I shaved of a bit at the bottom so that the neck is naturally sloped a few degrees. THEN, reenforced by the corner brace.
At least I'm learning a goood amount of mistakes on this first go. This reminds me of troubleshooting my first circuit. Frustrating as hell, but ultimately the most rewarding thing.
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by Korrigan 9 minutes ago. 5 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. yesterday. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango on Tuesday. 4 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 20. 7 Replies 1 Like
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Carl Floyd Mar 1. 15 Replies 0 Likes
Started by Joe in Performances, How to Play, Lessons, Concerts. Last reply by Carl Floyd Feb 29. 13 Replies 0 Likes
Started by Chance in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Feb 22. 12 Replies 1 Like
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!