Replies to This Discussion

Permalink Reply by The Capo Kid on March 25, 2014 at 9:07am

You could side mount them with a slot in the headstock with the low holes near the nut , or make the headstock thicker so you can only see the top hole .

• ▶ Reply

Permalink Reply by Dan Sleep on March 25, 2014 at 9:11am

I would just leave them the way they are. You are probably the only person who would notice or care. I would think if you cut them off, they would get all jacked up.

Or you could paint the top part black so the holes don't show up as easily.

:-)

• ▶ Reply

Permalink Reply by Ron "Oily" Sprague on March 25, 2014 at 9:34am

You could put post covers on them...little tiny macramed post covers.

Or, you could add a nice pice of thickish veneer to your head stock.

• ▶ Reply

Permalink Reply by the anonymous pick on March 25, 2014 at 9:39am

lil  hats  ;-)

• ▶ Reply

Permalink Reply by Ron "Oily" Sprague on March 25, 2014 at 9:42am

Micro-toques...actually, electrical wire twist joiner thingies would work

• ▶ Reply

Permalink Reply by Karmakaze on March 25, 2014 at 10:13am

MAybe you don't read well, the guitar is done.

You could macrame a great big post cover and use it to hide your shiny bald head ;-)

• ▶ Reply

Permalink Reply by Ron "Oily" Sprague on March 25, 2014 at 3:40pm

Aye kin reed jest phyne. You said you were finishing up a 4-stringer. Finishing up is not "done." These things are never "done." They always need tweaks. They can be rebuilt, added to, subtracted from, trashed to start over, lived with as is...until the next one. .And I have a full head of hair under that sh'ma and Harley bandanna. Admittedly, it is greying, but that doesn't matter much. Doesn't affect my playing, just my reading comprehension.

But don't cut off your posts. You'll never get the post covers to fit otherwise. >:-E

• ▶ Reply

Permalink Reply by Ben "C. B. Gitty" Baker on March 25, 2014 at 3:35pm

I am not sure which tuners you bought from me that would match the description you have given. Do you have a product code?

• ▶ Reply