I want to make a few single string diddley bow pickups with sewing machine bobbins.Would it be ok to use aluminium bobbins?....

Views: 456

Reply to This

Replies to This Discussion

Bobbins should be non-conductive. Wood or acrylic thin boards around 1/8" or 3/16" would be recommended. Or any  non-conductive material, even a vinyl record.

Coils need to be suspended, if you used aluminum, you can fry the whole shebang.

=D actually, you'll get nasty feedback, louder and worser than the 60 cycle hum.

Thank you.That's what I suspected,,,,

Just do like I did. Crack open an old wall wart, extract the transformer and use that as the coil.

You can then hide it in the bow and use a metal sewing machine bobbin for decoration on top of the coil. Just make sure there is a magnet inside the coil itself.

On my prototype 2 string bow, I have a big metal washer on top and it works just fine.

Thank you,Francois...

If you are talking about using an aluminum bobbin for wrapping the coil wire of a magnetic pickup, I'd say you will get something between interesting and disappointing.  Although aluminum is not Ferromagnetic, it does have some strange interaction with moving magnetic fields reacting with an induced current with an opposing magnetic field axis. 

An AC magnet will hover over an aluminum plate. 

Thank you,JL.I think I will stick with making bobbins from plastic or wood...

It is an interesting question, because in times gone by, we had a thread regarding so called "induction pickups", unfortunately, the object that initiated the thread had a dis agreement with someone and in a hissy fit closed his membership/ links with CBN, unfortunately due to the original initiator "owning" the thread, when he left , some 30 or 40 pages of development went as well. But, more relevant to your query is the fact that, essentially the the bobbins were a conductive material, but also the actual coil, but they needed separation/ isolation  from the magnets, I suggest that assuming you are using cylindrical magnets,a simple tube of heat shrink around them should see you ok, there is nothing I'M aware of that says the bobbin can't be alive, but, you do need separation from the mag field, of course you also have the issue where the actual winding on the bobbin needs to have a start and finish, but that is pretty easy to overcome

That's interesting.Perhaps I will experiment with them and see what the outcome is....

i did think that the bobin would act like a primary coil and the copper windings as a secondary.. in the induction pickup the secondaries were about 500 to 1000 windings... 

even using the way back machine the induction pickup thread is gone.. sad times whem most of the thread wasnt his!

https://web.archive.org/web/20161025131400/https://cigarboxnation.c...  found some of it!!

I will have a good look at that...Thanks

Was just looking at the patents...That's a pretty strange arrangement that they came up with.

Lots of talk about them here https://groupdiy.com/index.php?topic=27929.0

Personally, I really don't know if the sound is worth the effort. The way it's built it reminds me a bit of those two part bass pickups where the high and low strings get recorded separately in order to enhance the tone.

I have the feeling that those lace pickups are a bit like that but in a single package with an overly complicated layout.

Francois, they are remarkably simple to make in the basic form, but need a low to high impedance in line mic transformer, the Lace pickups don't require this as they have added circuitry to overcome it.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

String grounding

Started by John B Treutlein in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans yesterday. 9 Replies

DYI Box

Started by Jerry Draper in Using cigarboxnation.com - posting, profiles, web help. Last reply by John B Treutlein on Saturday. 12 Replies

Neck though corner

Started by Engblom in Building Secrets, Tips, Advice, Discussion. Last reply by Infirmity Citrus President Jan 28. 2 Replies

Blog Posts

A Tribute

Posted by Ghostbuttons on January 15, 2023 at 12:00pm 1 Comment

Let’s talk Aeolian…

Posted by BrianQ. on August 26, 2022 at 5:05pm 0 Comments

Latest Activity

Bernie Edwards commented on Randy S. Bretz's photo
Thumbnail

Looking for the next project piece

"Great timber stock...the world is your oyster!"
19 minutes ago
RTZGUITARS commented on Poorness Studios's video
Thumbnail

If You're Gonna Play in Texas (recorded at Billy Bob's) | Alabama cover

"What's Tuning. Just being at Jerry Lee and Jimmy's  double first cousins place…"
4 hours ago
RTZGUITARS commented on RTZGUITARS's video
Thumbnail

A I Wins

"Thanks AGP could use a  footstomping track"
4 hours ago
RTZGUITARS commented on RTZGUITARS's video
Thumbnail

A I Wins

"I don't usually use amp sim  AD but this is Amplitube from Presonus I did use  a Art…"
4 hours ago
Doug Thorsvik commented on Taffy Evans's photo
Thumbnail

1_Vintage Hubcap 3 string Electric guitar

"A very distinctive pair! A standout hubcap guitar build Taffy. I really like what you have done…"
4 hours ago
Doug Thorsvik commented on Greg Henshaw's photo
Thumbnail

The exhumed one

"Cool looking guitar Greg! A standout coffin design accented nicely."
4 hours ago
Doug Thorsvik commented on Bill Turner (Wunkyman)'s photo
Thumbnail

The Dustpan 2

"A looker for sure! Wow!!!"
4 hours ago
Doug Thorsvik commented on Bill Turner (Wunkyman)'s photo
Thumbnail

The Dustpan 2

"Amazing build! Very impressive Bill."
4 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Barbara Ann: 3-String Surf & Turf SLG Cigar Box Guitar

"Thanks much Brian! We try to keep our song choices interesting."
4 hours ago
BrianQ. commented on Wolfeather's photo
Thumbnail

Badaxe Music Festival

"Kool, I worked with the Dead & Jerry’s solo band as a Stagehand & assistant Guitar…"
5 hours ago
BrianQ. liked Bill Turner (Wunkyman)'s photo
5 hours ago
BrianQ. commented on Randy S. Bretz's photo
5 hours ago

Music

© 2023   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->