Replies to This Discussion

Permalink Reply by Taffy Evans on December 9, 2023 at 5:54pm

Hi, for me...all of the above.Hahaha.
But seriously, when I started I made my table saw. made my thickness sander, made my planer/jointer, and bought a massive old bandsaw. That was for full-size guitars dulcimers and mandolins, not CBG's, back then.

It may depend on how much wood preparation you plan to do before assembly, and how you buy your timber.

I would say, for me, one good power tool is not enough. It would only enable one to do only part of the build cleanly, quickly, and accurately.
Taff
HTML for replies...

• ▶ Reply

Permalink Reply by Justin Stanchfield on December 9, 2023 at 7:00pm

Thanks for the advice. I took woodshop way back in school and over the years have used table and band saws, radial arm saws and the like on other people's construction projects, but I was always more comfortable with a torch and a welder than I was with wood working. Now, of course, I've got the CB bug and somehow I don't think I can use acetylene to shape a neck!

• ▶ Reply

Permalink Reply by Korrigan on December 11, 2023 at 12:42am

My #1 is my bench-mounted belt/disk sander combo.

• ▶ Reply

Permalink Reply by Justin Stanchfield on December 11, 2023 at 4:13am

Yeah, I can see where that would be handy. Thanks!

• ▶ Reply

Permalink Reply by Chance on December 11, 2023 at 3:15am

Hi Justin,

Hands down the most indespensible power tool is the drill, and preferably a drill press.

I have built CBG'S using all hand tools, except for a drill. Even though I have a brace and bit, the power drill makes the job easier and more precise.

Just my half a cent.

• ▶ Reply

Permalink Reply by Justin Stanchfield on December 11, 2023 at 4:57am

Yeah, I would be lost if I had to use a brace and bit on a build. I've hung a lot of gates with those things over the years, and man, they're a lot of work!

• ▶ Reply

Permalink Reply by Carl Floyd on December 11, 2023 at 4:03am

Since you already have a drill, Dremel, rasp, & hand saws, You should seriously consider a table saw (if you have the room).  A table saw is indispensable for creating multiple necks from larger straight boards.  Also makes scarf joints so much easier.   

• ▶ Reply

Permalink Reply by Justin Stanchfield on December 11, 2023 at 4:24am

That's kind of what started me thinking about this. There was a table saw on Marketplace for $50, but it was already sold by the time I messaged the gal. But, that's why I wondered if there was something more useful before I continued my hunt.

• ▶ Reply

Permalink Reply by Justin Stanchfield on December 11, 2023 at 4:11am

• ▶ Reply

Permalink Reply by Taffy Evans on December 11, 2023 at 7:31pm

Hi again, also keep in mind that some machines can do more than the job they are initially designed to do.

Take the drill press as an example. Mine can be adapted to do all of the following with the added jigs and accessories.
Drilling
Sanding
Thickness sander
Routing
Buffing
Thicknessing cigar box size tops backs and sides.
Spindle sander
Fret press

Cheers Taff

• ▶ Reply