when cutting frets slot out using a caliper its difficult to be dead accurate.
example 1.121" , 3.782" ...does it matter if I can get 1.120" or 1.198"
its a midget dick in other words its neither here or there so tiny?

I'm just getting back into making box's guitars etc.not made any since last Xmas so I'm having to refresh my memories. just made a tin one out of an old biscuit tin ,just experimenting with colours.its a 2 stringers not the best I know. I'm not that good.lol I would love to make them as good as some of you guys do. but then I dont have a proper wood workshop? the neck is only 30mm wide so I dont think its wide enough for a 3 stringer.

Views: 369

Attachments:

Reply to This

Replies to This Discussion

Accuracy within a few Muggeseggeles is not necessary, but I'd invest in a ruler instead of using calipers.  I do my fret calculation in centimeters since its easy to find a meter stick but I still haven't found a decimal inches yard stick.

30mm width should be plenty wide for a 3 stringer, 1 centered and the other 2 10mm to each side should give pleanty of space for your fingers to hit one string at a time.

ok thanks.

You probably won't hear it until your out by 1-2mm but you can see it.

30mm wide neck is wide enough for a 3 stringer.

4mm each side with 22mm for the 3 strings. 11mm spacing.  Carefully not to load the neck too much though. Mine sit at about 30mm but the D at the back reaches 30mm depth. To help with string tension on mahogany. I also widen to 35mm depth towards the heel.

There's no real method to it and I suspect everyone builds them different.

That is a pretty snazzy looking paint job you got goin on on that one.

seen how its done on youtube .

so I was just trying it out on an old tin. it does look good.

going to try the swirly one next but I'll have get a bigger tub to do it.

I think they use humbrol model paint? I'll have to check it.

the neck is the same as in the picture  ash wood on outer and mahogany in the middle the grain goes side ways which I think is stronger than the other way.

you can see on the tuners bit. thickness with the fret board  25mm x 30mm.

I am beginning to believe that sometime in the near future somebody will have a youtube vid on brain surgery. ( :-D) What is that paint scheme called. It is really nice.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

Latest Activity

Gary O'slide posted a video
1 hour ago
T-Gripped liked Darryl Tuttle's photo
2 hours ago
Uncle John commented on J. D. Woods's photo
Thumbnail

Current Instrument Line-Up

"That is a mighty fine answer and not too lengthy considering all the information you…"
2 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
7 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

I Can Only Imagine: 2-String Chugger License Plate Cigar Box Guitar

"Thanks Uncle John! I’m always delighted when other Slingers choose it to play."
7 hours ago
J. D. Woods commented on J. D. Woods's photo
Thumbnail

Current Instrument Line-Up

"Hi Uncle John, Ha, ha!! So glad you asked, I wondered when somebody was gonna notice! I'll try…"
7 hours ago
A.D.EKER commented on AGP #'s photo
Thumbnail

AGP #530 - ''Pink Floyd''

"Colorfull Build  AGP # the last colorfull song they will  ever build ,the feud is going…"
13 hours ago
A.D.EKER commented on Poorness Studios's video
Thumbnail

Jose Cuervo | Shelly West cover on 4-string CBG

"its good to hear you are part of the "Old Content" did not get any of this ,but you…"
13 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

There i was Standing at the ..... BCB - A. D. Eker 2024

"Good morning UJ ,How are you ? hope you are fine! i did say "CrossRoads",Blues Rock its a…"
13 hours ago
Uncle John commented on J. D. Woods's photo
19 hours ago
Uncle John commented on J. D. Woods's photo
Thumbnail

Current Instrument Line-Up

"Nice line up.  Unusual pick guard on the big git that looks like a Martin.  What is that…"
19 hours ago
Uncle John commented on Ghostbuttons's photo
Thumbnail

Four projects

"Nice, nice trio."
19 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->