Replies to This Discussion

Permalink Reply by Randy S. Bretz on November 6, 2011 at 4:45pm

• ▶ Reply

Permalink Reply by Randy S. Bretz on November 6, 2011 at 5:03pm

• ▶ Reply

Permalink Reply by Uncle John on November 7, 2011 at 3:42am

That thing sounds beautiful, Randy.  So bright.  Nice playing.

Randy S. Bretz said:

• ▶ Reply

Permalink Reply by Uncle John on November 7, 2011 at 3:47am

Hi Doug,

    You can get an idea in the video that Randy Bretz posted of how  he built his.  I built one in a similar way, but no truss rod.  Check my photos and video too.  The video is Mercury Blues for a Merc hubacap.   Mine sounds more bluesy...   I think the hubcaps Randy and I used are about ideal.  I just siliconed my hubcap to the neck and backing plate. 

   Good luck. 

• ▶ Reply

Permalink Reply by atkinson traveler on January 19, 2012 at 9:39am

You can see in my ID photo a CG I built single cone style and uses 64 volvo hubcap for the resonator.

 I used a brass serving plate that was a little bigger than the cone and cut it out the middle leaving just enough room for the cone ( hubcap) to seat. The lip on the plate was raised so  I  cut the hole in the body  just big enough to allow the raised lip of the plate to rest on the body. Then I glued it on.

The bridge I craved out of bone and bolted it to the hubcap. I hope no one wants to shoot me , but I also drilled a number of holes in the hubcap to allow sound out.  Sounds like a dobro –warm tones.

• ▶ Reply

Permalink Reply by Slowpaw Steve T on January 20, 2012 at 12:13am

I think i remember Seasick Steve use Morris Minor hubcaps on his build, they must be pretty hard to get hold of now but do the job very well! (-;

• ▶ Reply

Permalink Reply by Seaman Jay on January 20, 2012 at 1:04am

I think i remember Seasick Steve use Morris Minor hubcaps on his build, they must be pretty hard to get hold of now but do the job very well! (-;

search for "top gear seasick steve" on YT!

• ▶ Reply

Permalink Reply by Mark Bliss on January 21, 2012 at 5:03am

I've been "tap testing" some hubcaps lately (yes I get funny looks sometimes but thats just from those that KNOW I am a little off) But I found that the common "dog dish" style hubcap used on late model (say 90's through recent) Ford trucks (Often found on vans) have a definite sharp natural ring to them that might be interesting!

• ▶ Reply