Tags:
Thanks for the prompt replies ..
I also fear aluminum to be weaker than stainless steel.
There is a comparison table that shows some sort of hardness similarity between the two metals:
http://www.fortwayneanodizing.com/aluminum/
It looks like type 3 hard anodizing could be a competitor though.
I found some stainless steel frets sold from a local shop at about the same price of CB Gitty .
Problem is that I am looking to build a non-wood guitar sort of the gittler guitar , where regular frets don't fit :
http://en.wikipedia.org/wiki/Gittler_guitar
I would definately avoid any metal compound where nickel is present , for its toxicity.
As a matter of fact I am looking into flatwound steel strings also.
I would set on wood if I found a reliable , cheap source of it somehow.
I guess I need to find this (Japanese Flush Cut Saw from Harbor Freight ) locally , maybe trough ebay ..
How do you cut frets slots on fingerboard without a jig ?
-aluminum nut-
Did you make it yourself or buy it ?
I wouldn't use bone as I am a long time vegetarian for ideological reasons.
-nickel bronze-
I see , this would be perfect for starting even though I am sure I would just need double portion of fretwire for first steps-errors.
By the way I read many post about nickel poisoning amongst musicians.
I am sure there are many who quit playing because of this problem as I have seen preatty scary photos of sick hands.
Can't imagine being a professional guitar player who loose his job because of this.
-NO FLATWOUND STRINGS-
I am really intrigued by them as I never got to test a flatwound strings guitar.
I read they are the secret to a great sound on basses.
-leonardo blues-
I'll keep my eyes open while I browse the forum.
-refrigerator magnets-
What do you use them for on a guitar ?
Hi Gabriele,
Check out whatever hardware or home improvement stores that are in your area and see what different kinds of wood they have to offer. Be sure to check out the trim wood they have as well. I live in China and have found cherry trim wood to be both inexpensive and easy to work with. It comes in 2.2 meter strips that are 3cm wide and 0.5cm thick. I use 6 or 7 strips and glue them together lengthwise to form my neck blanks and then shape that to for the head and necks for many of the instruments I've built. If does require a fair investment in clamps and it may take longer, but it might be a viable alternative to you. Also be sure to check out axe and shovel handle replacements. At garden supply stores they may have wooden stakes made out of pretty decent quality wood. Some builders like to use the wood they salvage from old furniture (very stable) and from wooden palates. When you have checked out your possible sources, get back with us and we'll let you know what sounds best for necks.
With regard to aluminum frets, they should be okay for nylon strings. One source is pop-rivets. However, for steel strings, cut nails are okay (but a bet messy gluing them in and somewhat time consuming). The best bet is real fret wire, and it's not as difficult to install as some people make it sound.
Good luck with your builds...
-Rand.
Uncle John, you owe me a cup of coffee for the one I just blew out my nose. seriously. LOL!
Ok, again I wish to appologize, I wasnt making fun of anyone. I just find it funny how these discussions sometimes swing from one extreme to another.
Yes you can color anodize, but we were discussing HARD anodizing to make aluminum wear resistant. Thats a bit different, more complicated and either way, involves using acids and chemicals that make a little nickel exposure look pretty mild.
I am not sure why you are so interested in stainless fretwire, I have only seen it used in rare circumstances, and when I tried it once I found it so much more difficult to work with in the finishing stages I never used it again. Nickel exposures effects from playing guitar is a new one one me, I'll have to look into that. Yes it has some hazards in the occupational situation with constant exposure to dust or fumes from for instance grinding, welding and so forth.
You dont need any "exotic" wood.
Last winter as an experiment I built a perfectly playable 3 stringer out of a (aprox prices) $1 box, $5 poplar 1X4, and spent about $20 on tuners, fretwire and strings. A bridge and nut from some Corian samples and some time. That build is covered by an article here in the intermediate builders group.
My questions here going forward are what was never addressed to begin with:
One must assess his/her abilitys and skills, tools and equipment, and budget.
You need to determine what you want to build, primitive, beginner, advanced. From one string diddly bow to 12 strings and harps and beyond. I would recommend to anyone, to start with something that they feel is well within the "easy" range for them, because you WILL hit snags and things to learn along the way. Then you can re-assess what you want to do next. Starting out at a very difficult level only leads to frustration.
Assess what you want to end up with as a result. Do you play already? What style do you play, and how do you want your project to fit into that?
Gabrielle, you have described your self as a "newbie" but beyond that we have no idea what we are dealing with here. You started out with questions about a build concept far beyond even most of the super-advanced level builds here. Even Scott Winburn, (Who I use as an example because his builds are some of the more outragious, out of the box but yet somehow still functional I have ever seen.) He would likely look at the fishbone design and cringe a little. Big challenges there.
And this discussion long ago left the realm of discussing aluminum frets. I suggest we need to start a new discussion, back in the real world of helping this poster, and we can start by assesing what you really want to build. I'd like to help if I can, but to be honest this thread has me lost.
Play nice!
Mark
-home improvement stores that are in your area-
Again ,Italy is not well serviced . Better look for stuff on the web (ebay and such).
-check out the trim wood they have as well.-
Looking into parquet stuff I found some mahogany strips ,but they are like 1 foot long , not sure you can make a neck joining shorter peaces .
- real fret wire, and it's not as difficult to install as some people make it sound.-
..mh .
-Good luck with your builds...-
Thanks.
-single piece of nylon wrapped around for frets, no bridge or nut, just through-body indidvidual string ferrules. Hmmm. Much easier than an actual Fishbone Gittler. Hmm.-
Nice , the 3 bass strings look like being nylon made , are those available , as I've allways seen those made in metal ?
-HARD anodizing-
Yes ,it looks like a complicated procedure ,as a matter of facts I've not found any explanation of it on the web.
-some hazards in the occupational situation -
Try to google for nickel toxic guitar , that would suffice I guess.
- That build is covered by an article here in the intermediate builders group.-
I'll try to spot that one. Do you happen to have a url for that at hand ?
-this thread has me lost.-
.. sorry about that.I play now and then . Style , I would say ethnic . I am just trying to minimize skills requirement for an home built 'cookies' (I don't smoke) box guitar...I can start another thread : Cookie box guitar , is that what you want ?
I'm not sure what you mean by parquet , but if the wood comes in foot long strips, then I'd get some good carpenter's wood glue and build a neck out of them in the same way a brick mason would build a wall with overlapping bricks. The glue joints formed by any modern wood glue will be stronger than the wood itself, and overlapping the joints in a brick like manner would strengthen those joints even further. Generally speaking, laminating wood together to form a neck will always result in a stronger neck than if you build with a solid piece of wood alone. So, I'd go for it. Build it up two layers at a time, let dry and then add another layer. Repeat until you reach the dimensions you need for you neck. Be sure to use cut plastic grocery bags or wax paper between the wood you are gluing together and your work surface, and any wood you may be using to clamp things down (to avoid glue oozing out and gluing together things together that you didn't want to (been there, done that)). You will need clamps, at least one every 3 inches and a straight length of wood to put between the clamps and the wood your are gluing together to even out the pressure and avoid marring you work piece. This technique should hold you over until you can find better wood suppliers - and even then you might want to continue building laminated necks for strength and beauty (if you mix contrasting woods).
A few tips:
1.) When gluing up the strips of wood, look and the ends to see how the grain curves. For maximum strength, make sure the grain in one layer curves in the opposite direction as the next layer, repeating this though all the layers of your neck.
2.) When laminating a neck, position the boards so that they are lined up vertically on their edge. Lets assume you are working with alternating layers of black and white wood. If you orient them on edge, then as you look at your neck where the fretboard will be, you will see black and white stripes, and the sides of the neck should be a solid color. You will likely want to use an odd number of boards in this case so your sides of the neck will be the same color. If you are using the same color wood throughout, this additional odd numbered board won't matter. Orienting the board up on edge like this will better counter act the tension on the strings so the wood won't bend (warp) upward over time.
3.) If you are laminating a neck for the beauty of contrasting woods, you should be careful to choose woods that expand and contract with changes in humidity at similar rates. As I don't really know enough about woods to predict this, most my necks tend to be made of the same kind of wood, valuing strength over beauty.
4.) Be a bit conservative with the glue as it tends to ooze out and makes a mess of things once you clamp things together. I use wet wipes (clothier than tissues) to wipe up excess glue.
Hope this helps.
-Rand.
Gabrielle,
Review this for ideas, maybe some help in here.
http://www.cigarboxnation.com/group/intermediatebuildingtipsandtric...
Kaman tried aluminum frets, cast as one piece with the fretboard and a "t" support under it. Then, the back of the neck was formed around it with foam and covered with plastic. The body was an ovation bowl with a plywood top.
The frets wore too quickly, even with topped with a layer of nickel. I had one of those guitars and the frets got dented so that they were unplayable. I filed them off, slotted it with a hacksaw and epoxied real frets in there.
-I'm not sure what you mean by parquet-solid wood flooring -
http://en.wikipedia.org/wiki/Wood_flooring.I guess this sort of wood should carry all the required characteristics for a neck .
-http://www.cigarboxnation.com/group/intermediatebuildingtipsandtric...
Very interesting, congratulations for your skills . I kind of spotted a beer bottle in the trash (picture) , watch out for straight lines :) !
-Kaman tried aluminum frets-
I wonder what sort of anodyzing , if any , they adopted.
My idea:
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray on Friday. 8 Replies 1 Like
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by Southern Ray on Friday. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. on Thursday. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango Apr 22. 4 Replies 0 Likes
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Carl Floyd Mar 1. 15 Replies 0 Likes
Started by Joe in Performances, How to Play, Lessons, Concerts. Last reply by Carl Floyd Feb 29. 13 Replies 0 Likes
Started by Chance in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Feb 22. 12 Replies 1 Like
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!