Replies to This Discussion

Permalink Reply by Thomas A. Boatwright on November 19, 2010 at 6:30am

I'm always looking for something to make tail pieces. If you can come up with some 2, 3, and 4 string items for tail pieces that'd be super.

Permalink Reply by Ben "C. B. Gitty" Baker on November 19, 2010 at 7:34am

Thomas -

I sell smaller brass hinges that make great tailpieces. http://www.cbgitty.com/cubecart/index.php?act=viewProd&productI...

You can drill 2, 3 or 4 smaller holes in these for the strings (the big holes are too big) and screw it either to your box or to the end of the neck if you are doing a box-through. Works great - these are what I supply in my CBG kits.

Ben/CBGitty

Permalink Reply by Jonny Sormo on November 21, 2010 at 6:08am

Hello again, i would really like to have a choise of small, easy to put together, miniamp's in C.B.Gitty store.
Small enogh to power with an 9v battery, and mostley of course, at very low cost. :-)
More scull tuner's, scull strap knobs, scull pot.knob's etc.

• ‹ Previous
• 1
• 2
• Next ›
• Page