Fret Slot filling?

A while back I bought a CBG from a builder and the next thing I knew was the neck had a major bow. I tried to contact him to get it replaced but it seems getting an answer has been long over due so I figure I might as well fix it myself. I was able to buy a jointer because I would like to build some cabinets and figured now was as good a time as any to find a good used one. When I checked the neck on the jointer table I found out it not only had a bow but also a twist. For grins I figured I would test the new machine. It worked like a jewel. The neck is now completely straight. I figured since I was going through this much work I might as well make it to a scale I like to also remedy other issues with the unit.

I want to change the scale length and would like some advice as to what would you guys use to fill the empty slots on the fret board? Would you use a thin veneer, epoxy, wood filler or something else? Thanks for any advice. I figure I might as well experiment on this unit because it was nothing but a good wall hanger as one of the members was telling me with all the issues.

0 members like this

▶ Reply to This

Replies to This Discussion

Permalink Reply by Frank Scott on October 1, 2018 at 6:01am

Thanks for the info. I will keep all of your advice in mind. Presently the fill looks pretty good being very similar to the neck I will see how it goes when staining. Thanks.

▶ Reply

Permalink Reply by Frank Scott on October 6, 2018 at 10:06am

That is a good idea to use glue with the wood filings. I used to use super glue with filings on native american flutes and it worked fine. Since the neck is red oak I used a golden oak plastic wood filler and then stained it with Minwax Golden Oak stain and it came out pretty good. I am going to use a couple of coats of satin polyurethane on the neck only. I will use almond oil for lubricating the fret board.

▶ Reply

‹ Previous
1
2
Next ›

RSS

Welcome to
Cigar Box Nation

Sign Up
or Sign In

Or sign in with:

The Essential Pages

Site Sponsor

Forum

Blog Posts

Latest Activity

AGP # commented on Wanhavihtahousu's photo

IMG_5132

"Nice Tins, I'm presuming they all have one of those 3 Pole Magnetic Pickups in them ?? :-)"

1 hour ago

AGP # liked Wanhavihtahousu's photo

AGP # liked Doug Thorsvik's video

California Dreaming: 3D Printed Cigar Box Guitar

1 hour ago

AGP # commented on AGP #'s photo

AGP #533 - ''Beware of Wife''

""Thanks A.D." for the very generous comment :-)"

1 hour ago

Timothy Peter Cooper and Sam Tringali joined Cigar Box Nation

4 hours ago

BrianQ. left a comment for Sam Tringali

6 hours ago

BrianQ. liked Doug Thorsvik's video

California Dreaming: 3D Printed Cigar Box Guitar

6 hours ago

Southern Ray replied to Bill Andy's discussion Copper Hardware

"Taffy makes good points. I have no experience either with the paint, but I have a bunch of 50+ year…"

7 hours ago

Doug Thorsvik posted a video

California Dreaming: 3D Printed Cigar Box Guitar

Cigar Box Guitar Slingers - Spokane, 201st Zoom Mtg 05/06/24. Only 1-finger chords, free songbooks here: https://www.cbgslinger.com/download CBG Songbook.pdf...

9 hours ago

1 Comment 2 Likes