After cutting the outside, this is what the body looks like (upside down):

The neck is made of quarter sawn maple with red arariba glued in the middle.  I decided on 'neck almost through' building technique, and have about a 2 degree back angle on the neck.  While I have not started this yet, I plan on using wenge for the fretboard, tailpiece, and bridge.

The book matched sound board was cut from a carefully selected spruce 2x6 which was pretty close to being quarter sawn and had no knots in the section I cared about.

Yesterday I cut the f holes and planned the bracing, and bent the binding wood (red arariba) which I will be using for binding the f holes:

More posts to follow as I progress.  If anyone has any suggestions or comments, I am happy to hear them... while I have a fair bit of woodworking experience, I don't have a lot of experience with guitars.  This site has been a great resource when I was in the planning stages, though... I could not have gone this far without the great content here!

Views: 341

Comment

You need to be a member of Cigar Box Nation to add comments!

Join Cigar Box Nation

Comment by The Big One on July 2, 2017 at 12:31pm

Yep, planning on binding top and bottom (bottom already done, image below; top will be done shortly after I work up the courage to glue the top in place).

Top is pretty much ready to go now... the f hole binding is complete (and while not perfect, I feel is passable for my first attempt).  I just finished installing the ladder bracing this morning (I have a very slight induced arch in the large brace, and an even more slight arch in the other two).  Nothing overly complicated or calculated, I just rounded off the brace on the belt sander until it looked right.  (In this picture you can see the completed f hole binding too).  The bridge will end up over top of the large brace, give or take.

Comment by Paul Craig on July 2, 2017 at 11:33am

Glad you stepped the neck trough down so the top can vibrate more. Love the binding in the F-Holes, hope you put it around the top edge too. That would look great. The Spruce will sound great.

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

Latest Activity

A.D.EKER commented on AGP #'s photo
Thumbnail

AGP #530 - ''Pink Floyd''

"Colorfull Build  AGP # the last colorfull song they will  ever build ,the feud is going…"
5 hours ago
A.D.EKER commented on Poorness Studios's video
Thumbnail

Jose Cuervo | Shelly West cover on 4-string CBG

"its good to hear you are part of the "Old Content" did not get any of this ,but you…"
5 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

There i was Standing at the ..... BCB - A. D. Eker 2024

"Good morning UJ ,How are you ? hope you are fine! i did say "CrossRoads",Blues Rock its a…"
6 hours ago
Uncle John commented on J. D. Woods's photo
11 hours ago
Uncle John commented on J. D. Woods's photo
Thumbnail

Current Instrument Line-Up

"Nice line up.  Unusual pick guard on the big git that looks like a Martin.  What is that…"
11 hours ago
Uncle John commented on Ghostbuttons's photo
Thumbnail

Four projects

"Nice, nice trio."
11 hours ago
Uncle John commented on Crazed Fandango's photo
Thumbnail

Frethound 4 String

"Looks great.  That looks like one I could really like playing.  Four strings too. …"
11 hours ago
Uncle John commented on David Hopkins's photo
Thumbnail

Anti-Body Guitars 18,19 and 20

"Great theme, workmanship and guitars!"
11 hours ago
Uncle John commented on David Hopkins's photo
Thumbnail

Angel 2x Anti-Body #17

"Very, very nice.  I hope it got to a good home and that it will be enjoyed.."
11 hours ago
Uncle John commented on Darryl Tuttle's photo
Thumbnail

Old portable heater

"Yup.  Good eye deer.  Maybe find a use for that fan too.  If not on this amp,…"
11 hours ago
Uncle John commented on Doug Thorsvik's video
11 hours ago
Uncle John commented on Dar Stellabotta's video
Thumbnail

Cigar Box Guitar 106 now for sale 🙌

"Looks and sounds good. Built under the solar eclipse!"
11 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->