Replies to This Discussion

Permalink Reply by Moritz Voegeli on March 23, 2017 at 1:08am

For overlong scale four-string CBGs I ended up with a similar tuning but with a flat third and flat seventh (D-F-A-C) which allows for very narrow patterns for most chord types. Whether you prefer G-7 or Gmaj7 depends too on the tonality of the music you want to play on your CBG.

• ▶ Reply

Permalink Reply by Dejan Nišić on March 23, 2017 at 7:40pm

Hello Moritz, is that D-F-A-C low to high? Do you have any audio or video of this CBG, it seems to offer few more possible combinations than my intended tuning, it may be a right answer for my CBG-baritone project, So if I use G as starting low point in my case this would give me G,A#,D,F, and broken in open chords its G,A#,D - Gm;   A#,D,F - A#; and all four strings G,A#,D,F, is Gm7, and A#6, I would love to hear this in action.

• ▶ Reply

Permalink Reply by Moritz Voegeli on March 23, 2017 at 9:12pm

Dejan hi, yes it's low to high, G-bB-D-F in your case. I'm not used playing with a slide, so open chords were not relevant for my decision, rather the possibilities this tuning offers for narrow chord patterns on the low frets of a very long scale. To compare different tuning options I'm used to compile kind of chord books to find the flaws of a solution. Sorry, I'don't have audios or videos. As said, your decision will depend on the tonality of the music you are playing, it's blues that sounds in my ears...

You're planing to try a neck with fanned frets? With a saddle or a zero fret? In the second case start with a movable zero fret, or one for the lower and one for the upper strings, a nail or the like, to optimize the intonation on the lower frets. My CBG with the best intonation, built by a friend luthier, looks like this, with the other frets not corrected:

• ▶ Reply

Permalink Reply by Dejan Nišić on March 23, 2017 at 11:19pm

Yes I already seen this zero fret config in one of your posts, and I think of incorporating idea of string separator behind the nut (zero fret), but otherwise Im not putting there any more frets (just fret markers) kinda like fanned fretless lap steel baritone, it is unusual, but could be interesting in its final form, also its fanned not for intonation but to keep even tension of strings, and to add a little bit of more natural position to my way of playing, by the way lowest string has a scale of 28" like a baritone, and highest one is 25" like a guitar

• ▶ Reply

Permalink Reply by Moritz Voegeli on June 15, 2017 at 6:49am

Dejan hi, some news about your project? Did you notice the video Mr. Speal did about an F7 tuning?

http://www.cigarboxnation.com/forum/topics/jazzy-f7-tuning-for-4-st...

For the opportunity to play major and minor chords with simple patterns I still prefer F-7 with a flat third. With which tuning did you finally end up?

• ▶ Reply