Replies to This Discussion

Permalink Reply by Fomhorach on October 3, 2016 at 3:07pm

Nice sound holes

Would you mind if I used that design in one of my builds?

Permalink Reply by Lonman on October 5, 2016 at 2:45pm

not sure if you were meaning the soundholes in the Edge uke by me, but you know, we all learn and get ideas from each other- heck yea, use the soundholes and even make them better. Not sure if you noticed, but the soundhole on the top- the center part broke out. I didn't think at the time to break out the bottom one to make them match. LOL

Permalink Reply by Fomhorach on October 5, 2016 at 10:20pm

I noticed but it's great design. It's given me a cool idea based on yours. 

Permalink Reply by Lonman on October 14, 2016 at 2:21am

cool, I look forward to seeing.

Permalink Reply by Wade on October 3, 2016 at 3:39pm

My Lil' Phillies cigar box Uke. Skeleton Key bridge, antique strainer ladle for tailpiece and a button fretmarker. I put a keyhole in the upper side as a sound hole. I matched the headstock with the box with paint and "P" label from the inside of the box.

Permalink Reply by Matt "MajicDaddy" Simpson on October 3, 2016 at 4:55pm

Build #58 Island Jim #TWO electric uke. Oak fretboard and neck, black Walnut nut and bridge, 15 inch scale, friction tuners, 6pole single coil pickup with tone and volume. I used the 1, 2, 3 & 4 strings from a regular pack of acoustic guitar strings and tuned them to C,E,G & A. Shout out to Scott Thibeault for the help with that.

Attachments:

• 20160924_134912.jpg, 1.5 MB
• 20160924_135007(2).jpg, 1.6 MB
• 20160924_134932.jpg, 1.9 MB

Permalink Reply by John Sawyer on October 3, 2016 at 5:47pm

Permalink Reply by Fomhorach on October 5, 2016 at 8:35am

Nice adjusted bridge there 

Permalink Reply by John Sawyer on October 3, 2016 at 5:48pm

Padron Uke, Concert Scale...

Permalink Reply by Sonny Wentling on October 4, 2016 at 3:00am

A couple of mine !!

Attachments:

• 20160918_190146.jpg, 2 MB
• 20160918_190215.jpg, 1.4 MB
• 20150816_221847.jpg, 883 KB

Permalink Reply by David Comtois on October 4, 2016 at 3:18am

Here's my addition. Handmade neck and fretboard, upcycled uke bridge and tuners. Custom paint by my student Cassandra. We call it "Full Moon Fever."

Oh, and it's electric!

Attachments:

• IMG_0275.JPG, 1.1 MB
• IMG_0276.JPG, 1.2 MB
• IMG_0277.JPG, 1.2 MB

Permalink Reply by Rusty Summer on October 4, 2016 at 4:26am

Uke I made for my wife for Mother's Day this year.

• ‹ Previous
• 1
• 2
• 3
• 4
• …
• 12
• Next ›
• Page