I was watching Ben Gitty on the CBN-TV and he was gluing down a fret board with hot glue.  He's talking about the problems he might have with the glue setting up before he can get his clamps on it.  The feed was flashing 'live' but apparently wasn't when I was watching it so my suggestion didn't get posted.

Anyrate.  I looked about and didn't find anything so thought I'd post what I do here.  When I'm gluing on a fret board to a neck I use a level now.  I mark out on the neck where I'm goop'n on the glue.  Slather it on, slap the fret board on top then put my level on top of the fret board.  Make fine adjustment in positioning the fret board and then use two quick clamps to suck everything together.  Once the fret board is in position I torque the clamps down as tight as I can get them.  This gives an even pressure the length of the fret board/neck.  I find it very quick and no need of salt or anything else to keep things from sliding around.

When the glues set and the clamps removed the level kept everything nice and straight.  So when I bang in the frets later they end up being nice and level with little fling needed. 

Views: 437

Reply to This

Replies to This Discussion

I am going to def give that a try too...  Thx man...  noth'n better than the CBN people

Tried this on my last neck. works like a hot tamale... Better than tapping them in with a hammer. Funny how I didn't take it that one step further... But I often will miss the obvious, Thx again for adding the extra bit Wayfinder, appreciated.

OOIII  VEY!!!   Can't take the pressure, have to go back to my hidie hole and build something. 

BTW...  never thought of building flutes, gonna have to check that out.  Maybe incorporate that into a CBG build somehow...  :)  a huff'n puff cbg... 

i find the hardest thing is to get the neck level and square before the fretboard goes on ..

Yep... Unless you have a shop full of equipment I find it the biggest challenge too. I have a band saw and very old breadbox Delta planer so my squaring is the biggest challenge I face.

Flat surface, couple of sheets of sandpaper. Double sided tape. Circular movements. Easy peasy.

This was for a headless ukulele.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

Nut

Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Taffy Evans on Sunday. 6 Replies

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

Latest Activity

BrianQ. commented on Cigar Box Nation's status
"Got my popcorn ready, waiting for the show! :)"
4 hours ago
BrianQ. commented on Rich's photo
Thumbnail

RTL Drawing box 1

"Defending the nation, one cbg at a time!!!"
4 hours ago
BrianQ. liked Rich's photo
4 hours ago
Doug Thorsvik commented on Doug Thorsvik's photo
Thumbnail

Six Chugger CBG Build

"Just stealing a page from your playbook Rich! Since all the boxes are vintage, I decided to place…"
5 hours ago
Rich commented on Doug Thorsvik's photo
Thumbnail

Six Chugger CBG Build

"Interesting,  the juxtaposition of the 3D printed handmade items and the Singer sewing machine…"
8 hours ago
Rich liked Doug Thorsvik's photo
8 hours ago
Rich commented on Cigar Box Nation's status
"Looking forward to it."
8 hours ago
Rich posted a photo

RTL Drawing box 1

Coming soon to a CBG near you.- Marching right out of the frame.
9 hours ago
Cigar Box Nation posted a status
"Working on updates to the updated Cigar Box Nation! Lots to do. Coming soon -shane"
12 hours ago
BrianQ. left a comment for Darren Rooke
13 hours ago
Doug Thorsvik commented on Doug Thorsvik's photo
Thumbnail

Six Chugger CBG Build

"You got it BrianQ! I just need to recruit a player for each. I certainly would Alan! I used to have…"
15 hours ago
Darren Rooke is now a member of Cigar Box Nation
18 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->