#1 resource for Cigar Box Guitars, Free Plans, How-To, Parts & More!

Leveling fret boards

I was watching Ben Gitty on the CBN-TV and he was gluing down a fret board with hot glue. He's talking about the problems he might have with the glue setting up before he can get his clamps on it. The feed was flashing 'live' but apparently wasn't when I was watching it so my suggestion didn't get posted.

Anyrate. I looked about and didn't find anything so thought I'd post what I do here. When I'm gluing on a fret board to a neck I use a level now. I mark out on the neck where I'm goop'n on the glue. Slather it on, slap the fret board on top then put my level on top of the fret board. Make fine adjustment in positioning the fret board and then use two quick clamps to suck everything together. Once the fret board is in position I torque the clamps down as tight as I can get them. This gives an even pressure the length of the fret board/neck. I find it very quick and no need of salt or anything else to keep things from sliding around.

When the glues set and the clamps removed the level kept everything nice and straight. So when I bang in the frets later they end up being nice and level with little fling needed.

1 member likes this

▶ Reply to This

Replies to This Discussion

Permalink Reply by BP - RabidSalad - on August 3, 2016 at 12:17pm

I am going to def give that a try too... Thx man... noth'n better than the CBN people

▶ Reply

Permalink Reply by BP - RabidSalad - on August 6, 2016 at 2:53am

Tried this on my last neck. works like a hot tamale... Better than tapping them in with a hammer. Funny how I didn't take it that one step further... But I often will miss the obvious, Thx again for adding the extra bit Wayfinder, appreciated.

▶ Reply

Permalink Reply by BP - RabidSalad - on August 6, 2016 at 8:57am

OOIII VEY!!! Can't take the pressure, have to go back to my hidie hole and build something.

BTW... never thought of building flutes, gonna have to check that out. Maybe incorporate that into a CBG build somehow... :) a huff'n puff cbg...

▶ Reply

Permalink Reply by jabes on August 5, 2016 at 10:50pm

i find the hardest thing is to get the neck level and square before the fretboard goes on ..

▶ Reply

Permalink Reply by BP - RabidSalad - on August 6, 2016 at 2:48am

Yep... Unless you have a shop full of equipment I find it the biggest challenge too. I have a band saw and very old breadbox Delta planer so my squaring is the biggest challenge I face.

▶ Reply

Permalink Reply by Fomhorach on August 9, 2016 at 1:52am

▶ Reply

Permalink Reply by Fomhorach on August 9, 2016 at 1:54am

Flat surface, couple of sheets of sandpaper. Double sided tape. Circular movements. Easy peasy.

This was for a headless ukulele.

▶ Reply

RSS

Welcome to
Cigar Box Nation

Sign Up
or Sign In

Or sign in with:

The Essential Pages

Site Sponsor

Forum

Free PDF Download: Vintage Guitar Effects Plans - 1967 Fuzzbox and 1969 Treble Boost

Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes

No Harmonics

Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes

Camera suggestions?

Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes

CBG site issues, continued.

Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes

Anyone used a violin-style tailpiece on a CBG?

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Carl Floyd Mar 1. 15 Replies 0 Likes

Guitar for the grandson

Started by Joe in Performances, How to Play, Lessons, Concerts. Last reply by Carl Floyd Feb 29. 13 Replies 0 Likes

Building with vintage paper/pressed board cigar boxes.

Started by Chance in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Feb 22. 12 Replies 1 Like

Blog Posts

I'll be fashionable this summer =)

Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like

Everyone can make CBG. And I did it =)

Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes

.✨. Cover Me ..♪♫•¨•. ~ the Delta Blues Outlaws

Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes

Q&A with Arkansas-based talented blues musician Billy Jones, one of the very best authentic modern artists

Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes

Big Power Bank for Small CBG =)

Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like

Latest Activity

Gary O'slide posted videos

18 minutes ago

A.D.EKER commented on Poorness Studios's video

David Bowie's Space Oddity (covered on guitar & Stylophone)

"Nice ly done Kale olthow whit verry minimal typecal Space odity effects, i know it was your Bowie…"

21 minutes ago

Dogleg Steve posted a status

"Hey - I came runner up top 10 of the 2023 4th annual international CBG video playoffs!"

1 hour ago

0 Comments 0 Likes

Dogleg Steve posted videos

1 hour ago

Doug Thorsvik commented on Poorness Studios's video

David Bowie's Space Oddity (covered on guitar & Stylophone)

"Wow! Well done Kale. Nailed it!!! You really captured the essence of the song and it’s…"

1 hour ago

Dogleg Steve posted a status

"https://www.youtube.com/watch?v=R0ZKu7T1wAI"

1 hour ago

0 Comments 0 Likes

Poorness Studios posted a video

David Bowie's Space Oddity (covered on guitar & Stylophone)

I've been meaning to do a cover of this since I got my David Bowie Stylophone last Christmas. This song is outside my vocal range and difficult to sing, but ...

2 hours ago

2 Comments 1 Like

A.D.EKER commented on A.D.EKER's video