How to use grain filler for a smooth finish

I have always used oak for my necks, and at first I was always frustrated that no matter how well I sanded the wood, the oak's open pores meant that the finish was never completely smooth. After a bit of research I came across grain filler, and ordered a tin of Rustins.

Grain filler is different from wood filler, which is used to fill larger voids in wood. It comes as a thick putty which you thin down with white spirit (mineral spirits) or turpentine to the consistency of cream. You then apply it to the grain of the wood and it does a pretty good job of filling in the pores. I use the 'natural' version for oak, but they do other shades for darker woods etc.

First off, get your neck sanded down as smooth as possible. I do mine up to 320 grit at this point. Then give the neck a wipe down with white spirit to remove the wood dust.

I apply the grain filler all over the neck with my finger, rubbing it lengthways into all of the pores. Once the whole neck looks done I leave it to dry overnight.

This is what you see after the grain filler dries out. At this point I just lightly rub the excess off the surface with my thumb until I see this:

The pores are now filled in. Now it's time to lightly sand again, starting at 220 grit and working up to 600. A quick rub down with white spirit again and you're ready to start applying finish.

As you can see, the grain filler does a really good job of blending in with the wood tones. 

The same neck after an additional 6 coats of Tru-Oil, then a final 1200 grit wet sanded coat a week later. Lovely and smooth! I hope this helps.

-Richey Kay

Views: 3484

Comment

You need to be a member of Cigar Box Nation to add comments!

Join Cigar Box Nation

Comment by Joe Caruso on December 28, 2015 at 11:23am

Great info! Thanks for sharing. 

Comment by Mike Willmouth on December 28, 2015 at 6:39am

Thanks!  This is good information.  My last build I used the Birchwood/Casey Gun Stock Sealer and Filler.  It seemed to work well too, except you only get 3 fl. oz.  The Rustins looks to be a little thicker and would probably do a better job of sealing the bigger ruffer spots. 

Comment by Muddbone on October 29, 2015 at 2:24pm
That's some good information to share. Thanks:)
Comment by Monterey on October 22, 2015 at 3:10pm
Ooohh, that's nice! I make all all my fretboards out of Oak too- I'm going to try some!
Comment by Bob Marioni on October 21, 2015 at 10:50pm

Excellent job! This information is extremely valuable to me!

Comment by Adam Harrison on October 21, 2015 at 9:48pm

Thanks, that was awesome!

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

Latest Activity

Doug Thorsvik posted a video

Shout with Joy to God: 2-String Chugger License Plate Cigar Box Guitar

Cigar Box Guitar Slingers - Spokane, 199th Zoom Mtg 04/22/24. Only 1-finger chords, free songbooks here: https://www.cbgslinger.com/download CBG SOF Songbook...
10 minutes ago
A.D.EKER left a comment for David Hopkins
"They look a lot like the Roger Farrington creation's from 1980!"
1 hour ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

All You Got to do is put your Mind to it ! BCB - A .D .Eker 2024

"Yes he was ! Uncle John ! thank you for the like and kind comment ! Dang me !"
1 hour ago
Uncle John commented on Gary O'slide's video
Thumbnail

Acoustic folk box cigar box guitar @RhialtoPurple

"Nice.  Bright and sunshiny.  Feeling good music.  Thanks!"
1 hour ago
Uncle John commented on A.D.EKER's video
Thumbnail

All You Got to do is put your Mind to it ! BCB - A .D .Eker 2024

"Roger was extra special.    And fun. Wailing harp there, A.D.!    Good tribute!"
1 hour ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

All You Got to do is put your Mind to it ! BCB - A .D .Eker 2024

"    You can Rollerskate in a Buffalo Herd !!"
4 hours ago
A.D.EKER commented on A.D.EKER's video
4 hours ago
A.D.EKER posted a video

All You Got to do is put your Mind to it ! BCB - A .D .Eker 2024

a Tribute to the Great lyricist Roger Miller ,a adapted version of the Tune " You cant Rollerskate in a Buffalo Herd " whit the refrein , on a four string c...
4 hours ago
A.D.EKER commented on A.D.EKER's photo
Thumbnail

BCB Folding Backpacker 21,5 inch Scale

"Thank you all for the Like on the Picture ! appreciated !"
4 hours ago
A.D.EKER left a comment for Order99
"Thanks Order 99 for your take on the Tracks ! Glad you liked them ! much appreciated ! Kind…"
4 hours ago
Order99 liked Doug Thorsvik's video
9 hours ago
Order99 liked Gary O'slide's video
9 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->