Still trying to make that 6 stringer and need some help....I am making a neck thru as suggested here on this web site and need to know if I need to brace the neck some how, see pictures.....
I saw on the resonator group someone had added a bunch of pictures on ways to mount a neck, I wish someone would do that for 6 stringers...
Also if you are a 6 string builder and have in process pictures, please give a shout out and I will check out you page, I know about Juju and Smokehouse, any others?
Thank you guys for any and all help...hope the pictures work never did this before.
Tags:
When I tried to build a six string with the neck through design, like a three string, I found the neck bowed under the tension of six strings. Two solutions I have seen. 1) Build in a truss rod. 2) build a laminated neck using several pieces of wood going against the grain. Last option is to used a prefab guitar neck and mount it differently. Best of luck with it!!
Jeff
You're going to have to strengthen the neck in some way. You can add wood to the portion inside the box to keep it from flexing, but in the neck proper, the most reasonable approach would be a two way truss rod. They can be picked up on line for around $10 Truss Rod
Having the ability to adjust the neck for bow in either direction will be a real plus for you on this first build.
Hi Doggyly.
I didn't see how thick your neck was inside the box, thus the suggestion. If it is already 1 1/2" thru the box, then it should be fine as-is. If you really don't want to do a truss rod, then you are on the right track with shortening the scale. Also, you may want to consider light or extra light gauge strings. That being said, the installation of a truss rod is not that difficult if you have access to a router. You route a slot for the rod then glue the fret board over it. There are several youTube videos on installing a truss rod. You might try reviewing them before you decide.
The last thing you want is to put all the work into building your 6-stringer then fight a warping neck either from the beginning or six months down the road.
Good luck with it.
I gonna build a six string, but I have a standard guitar neck and will need to do some serious bracing.
Good luck with your build. Let us know how it comes out.
Truss Rods cost $15-$20... You'll need one.
Though for a through-neck design, you might try a piece of 3/8" steel tubing... but for that much work, a truss rod is the way to go.
Based on your 2nd photo, it appears that there is plenty of strength in the section of neck inside the box. You should be fine just attaching the box to the neck with a couple of screws. With a thru neck the box doesn't really experience any string tension (except for the downward force of the bridge on the box lid).
The place to add strength is in the portion of the neck that is only a single course of wood (3/4" thick + 1/4" for fret board).
I'm sure you could produce a playable 6-stringer, but I think you can learn a lot about building by starting with a 3-stringer. Not only is it pretty easy to build, the open tuning makes starting to play very easy and quick. That's where the fun comes. Knowing you cut, glued, screwed, tuned and build the instrument you are making good noises with.
Try a three, learn to play it then ask if you need a 6-stringer to get where you want to go.
I started with a 3-string slider (which I still play regularly) and how have 10 3-stringers and one 4-stringer. I enjoy playing every one of them because they all sound and play differently.
Good luck with whatever you decide.
Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray on Tuesday. 11 Replies 0 Likes
Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Taffy Evans on Sunday. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray Apr 26. 8 Replies 1 Like
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by Southern Ray Apr 26. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. Apr 25. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango Apr 22. 4 Replies 0 Likes
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!