I finally made a near perfect cut of a wine bottle neck using a jig and the hot/cold water technique. I'm wondering now about the best way to smooth the cut edge. I usually use a Dremmel with a grinding wheel but that is dangerous and gets fine glass dust everywhere including your lungs and eyes even though I use a mask and goggles.
Does anyone know if a propane torch gets hot enough to melt the cut edge so it will be smooth and rounded like commercially made glass slides are?
I Know I can just try it but I figure someone here has already.
Thanks for any suggestions.
Bluesheart
Tags:
Didn't want to buy 6' of pipe, so I bought a 2" long copper coupling to experiment with. It looks clean and smooth, right? Now I can feel very tiny metal frags under the skin of my slide finger. Yuck! Now I'm using the same emery cloth I bought for smoothing glass to polish the cut ends of the copper pipe.
Managed to drop a bottle neck on a concrete floor while packing up after playing last night. Ugly shards of glass all over...
Reinforces my notion that I may use broken bottles for my own amusement (I really LIKE the sound.), but I'd hesitate to sell or give them to anyone--particularly youngsters.
Thanks for the tips and the lead Tom T. I guess I just like using a homemade slide on a homemade guitar! Ain't worth trashing my health for though. I think the underwater sanding sounds like a good idea.
Diamond disc and water spray
I use Colavita balsamic vinegar bottles - the short fatter bottle with a longish neck - as the necks are straighter than wine bottles. I score with a glass cutter and then pour boiling water over the score and dunk in a can of iced water. 2 to 3 times drops it off. To take off the imperfections I use wet dry sandpaper dipping the slide in water often to keep it very wet. I start with 60 to take out all imperfections until it's totally flat on both ends. Then 220 and use that to round the edges, then 400 and then 600 to polish it off. Just a 3 or 4 inch square with a small board underneath (to protect the coffee table). I usually do this as I talk with someone or while watching TV. It takes 1 to 3 hours depending on how good the break is.
I'm glad you referenced the time required. (I've been treating 15 minutes as a l-o-n-g time to work on one.)
Maybe I can go snorkling while I sand!
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. 13 hours ago. 4 Replies 0 Likes
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by A.D.EKER on Wednesday. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango on Tuesday. 4 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods on Saturday. 7 Replies 1 Like
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Carl Floyd Mar 1. 15 Replies 0 Likes
Started by Joe in Performances, How to Play, Lessons, Concerts. Last reply by Carl Floyd Feb 29. 13 Replies 0 Likes
Started by Chance in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Feb 22. 12 Replies 1 Like
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!