Tags:
Also I should mention that for more dense woods (rosewood, ebony, etc), you want to score the joining surface of the fretboard so that the glue has something to key to. This is especially important for oilier woods like rosewood.
Granted, I'm on my first builds, but this is what I did.
I used a forstner bit in my drill press to make recesses in the fretboard for some 1/4" round fret markers. I then clamped the fretboard to the neck and took a small drill bit and used the center punch hole made by the forstner bit and drilled into the neck at the 3, 9, and 15 spots. I then inserted some small pick guard screws. I then sanded everything the way I wanted it, installed the frets, etc, and then I removed the fretboard for finishing... I was doing an ebony stain on the fretboard and a natural finsih on the neck.
After I got it stained and finished with tung oil, I applied glue to the face of the neck and then the back of the fretboard and then screwed the fretboard back on to the neck... perfect realignment.
After the glue dried, I removed the screws and installed the fret markers.
You are going to be a great builder... You've come up with an intuitively elegant way of handling a task that could be so frustrating...
the best,
Wichita Sam
Thanks, Wes... that means a lot.
Started by Wes "I'm Baaaaack" Yates. Last reply by Slow Mick Dec 21, 2023. 3 Replies 0 Likes
Started by John Sims. Last reply by BrianQ. Sep 5, 2018. 4 Replies 1 Like
Started by John Sims. Last reply by Joe Caruso Nov 22, 2015. 8 Replies 1 Like
Started by John Sims. Last reply by Brown Water Jerry (Rice) Jun 30, 2015. 7 Replies 1 Like
Started by Allan. Last reply by Monterey Jun 28, 2015. 8 Replies 0 Likes
Started by Wes "I'm Baaaaack" Yates. Last reply by Monterey Jun 28, 2015. 22 Replies 3 Likes
Started by John Sims. Last reply by Monterey Jun 28, 2015. 11 Replies 1 Like
Started by Wes "I'm Baaaaack" Yates. Last reply by Joe Caruso Apr 12, 2015. 9 Replies 0 Likes
Started by John Sims. Last reply by Joe Caruso Apr 12, 2015. 3 Replies 0 Likes
Started by John Rivers. Last reply by Steve Walker Mar 18, 2014. 1 Reply 1 Like
Started by Wes "I'm Baaaaack" Yates. Last reply by Wes "I'm Baaaaack" Yates Jan 2, 2013. 4 Replies 0 Likes
Started by Wes "I'm Baaaaack" Yates. Last reply by jamie bark Aug 10, 2012. 16 Replies 1 Like
Started by Wes "I'm Baaaaack" Yates. Last reply by Soul Cat Guitar Uke and Amp Nov 28, 2011. 10 Replies 1 Like
Started by Jerry. Last reply by Jerry Oct 26, 2011. 5 Replies 3 Likes
Started by Wes "I'm Baaaaack" Yates. Last reply by Wes "I'm Baaaaack" Yates Jul 14, 2011. 12 Replies 1 Like
Started by nick tyson. Last reply by nick tyson Jul 7, 2010. 2 Replies 0 Likes
Started by Hey, TURN IT DOWN!. Last reply by Outhouse Instruments May 30, 2010. 4 Replies 0 Likes
Started by Robert Hynden. Last reply by Robert Hynden Apr 13, 2010. 2 Replies 0 Likes
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!