Replies to This Discussion

Permalink Reply by Gary Ross on February 23, 2015 at 7:10am

Put a few more forms together and my winder.

• ▶ Reply

Permalink Reply by Gary Ross on February 24, 2015 at 6:50am

all mounted and done.

• ▶ Reply

Permalink Reply by Tom T on February 24, 2015 at 12:11pm

Beautiful job. Very professional looking build. But, more importantly (as Wayfinder aluded) what's the lowdown on that coil winder? motor?. counter? setup details? It looks like a very well set up winder unit.

• ▶ Reply

Permalink Reply by Gary Ross on February 25, 2015 at 7:54am

Hi guys got the parts a few years ago so American Since and Surplus no longer has motor (its kinda slow any way.) and ebay I couldnt find same counter but this should work http://www.ebay.com/itm/LCD-Punch-Counter-Digital-5-Digit-inculding...  motor any thing that turns fast enough a battery drill from Harbor Freight or this off of ebay  http://www.ebay.com/itm/AC-110V-0-2A-3W-130r-min-Speed-8mm-Shaft-Di...

• ▶ Reply

Permalink Reply by Tom T on February 25, 2015 at 9:53am

Hey, thanks for passing along the information on your winding rig. The counter you linked to looks good for only $11 including the sensor and shipping. A winding motor is less of a challenge since, as you point out, a drill motor, drill press or similar will work.

I know that it may be much easier to just write a check an buy a pickup, but one of the great things about CBG is the learning process. I'm sure my wife can find better things for me to spend time on, but designing, building and hearing my own pickup is a pretty interesting way to spend time.

Thanks for sharing your information and experience.

Permalink Reply by john mackay on February 25, 2015 at 9:03am

some of you guys certainly got patients ,I couldn't be bothered with all of that.

probably coz I've got other things to do that is a little more important.

• ▶ Reply

Permalink Reply by Gary Ross on March 10, 2015 at 6:34am

Forgot that I was going to post the DXF file for the forms lets see if this works it was done in auto cad saved as DXF do not know if this will work. File seems to work if you do not have a drafting program to open it in just save it so it can be sent to a laser cutter.

Attachments:

• pup3.dxf, 160 KB

• ▶ Reply

• ‹ Previous
• 1
• 2
• Next ›
• Page