Replies to This Discussion

Permalink Reply by Randy S. Bretz on May 27, 2014 at 4:14am

http://handmademusicclubhouse.com/photo/albums/2-box-build                http://handmademusicclubhouse.com/photo/photo/slideshow?albumId=451...

• ▶ Reply

Permalink Reply by The Phrygian Kid on May 27, 2014 at 9:22am

I've put one at each end before

http://www.cigarboxnation.com/photo/2012-04-leaping-cow-electric-mo...

seen a few where guys have copped Rany's idea after his one too

• ▶ Reply

Permalink Reply by david kave on May 27, 2014 at 9:09pm

huh that one is really brutal!

• ▶ Reply

Permalink Reply by Shawn on June 1, 2014 at 1:00pm

Here you go 2 Tabak boxes. I first sand each box end that will be glued together flat and flush to each other( as we all know they are not squared at all) then glue and screw them together.

Attachments:

• image.jpg, 227 KB

• ▶ Reply

Permalink Reply by Shawn on June 1, 2014 at 1:03pm

One more. I have built 6 so far this way and all have held up over 4 years so far with out failing. I would like to say you should bracing the original box joints as this was the failing point on my first one.

Attachments:

• image.jpg, 223 KB

• ▶ Reply

Permalink Reply by david kave on June 1, 2014 at 9:43pm

Thank you! It was exactly the thing I am looking for! You are building beautyfull guitars!

• ▶ Reply