Replies to This Discussion

Permalink Reply by Jim Woods on January 28, 2014 at 5:46pm

I would use the continuity test - the one usually with the buzzer.

• ▶ Reply

Permalink Reply by Jon Leslie/Runaway Veal Music on January 28, 2014 at 5:53pm

Which one is that? I have a freight harbor multimeter..

• ▶ Reply

Permalink Reply by John Sawyer on January 28, 2014 at 5:54pm

If they don't pull off with a light tug, you;re fine...  Look at the solder, if it looks like a sphere sitting on the disc, it's a bad joint.  A good joint looks like a drop of water: Stuck down, flat on the bottom, round on the top.

• ▶ Reply

Permalink Reply by Jon Leslie/Runaway Veal Music on January 28, 2014 at 6:11pm

Cool. I will do a final test tomorrow as this piezo has a jack and a switch. The switch has to be screwed in before soldering ..so I'll test with an amp tomorrow..thank you!!! Looks like a water drop

• ▶ Reply

Permalink Reply by Yankee Dog on January 29, 2014 at 1:24am

just plug it into your guitar cable. If it makes noise it is good.

 

 

• ▶ Reply

Permalink Reply by Gumbo Blues Guitars on January 29, 2014 at 3:34am

How about a mini humbucker?

• ▶ Reply

Permalink Reply by John Sawyer on January 29, 2014 at 5:18am

Why not?  People do it all the time...  Flatpups look awesome... and they're humbucking...

• ▶ Reply