Hi all!
I want to build a 6-string CBG-style license plate guitar.
I'd like some info from those that have made such guitars. Things like bracing, attaching the neck, placing a piezo.....the RadioShack type that are common to these guitars not a commercially made guitar piezo (where would be the best place to put a piezo in order to pick up the best sound on such a small guitar).
I'd also like to know about what I should avoid, what I should be on the look out for when it comes to problems during the build and whatever other info or advice any of you may have.
If anyone has photos or drawings of your particular builds (I am looking for structural stuff in this instance) that would be greatly appreciated.
I know many people call their license plate guitars "license plate resonators." However, when it comes to those I have seen videos of only one or two seemed to actually have a resonator cone and they were 3 or 4 strings rather than 6 as I want to build.
I am thinking of using oak boards that I can get at Lowe's for both body and neck. For the bridge I am thinking of a wrap-around bridge/tailpiece like this one:
http://www.stewmac.com/shop/Bridges,_tailpieces/Electric_guitar,_no...
I plan to use a magnetic pickup along with the piezo that I already mentioned.
Ideally I'd like to have the body no bigger than the size of the license plate itself. However, I know there may be issues with doing this. So, as I said, I would welcome any advice on building such a guitar and any design plans that any of you may be willing to share.
Thanks,
-James
Tags:
Thanks for the info Jawbone!
Nice looking guitar there. What's the scale length on that?
What I was thinking for the neck is to make a laminated neck of 3 or 4 sections. I figure it would be more stable for the tension of a 6-string. It wouldn't look as pretty as a single piece but when it comes to stability over looks I would rather go for stability
As for that disc piezo on the neck, where exactly do you locate it?
Is that a truss rod cover I see?
Hey JW - scale is 25.5" , I counter sink the neck about 1/4" for the disc and embed it in silicone, probably under the 0.
No truss rod, I use a chunk of aluminum angle as a nut.
My plan was to use a pre-slotted fret board. Then I only need to taper it and install the frets. While I plan to use this for slide more than anything I want to be able to chord the strings if I want. I have short stubby fingers and not much control with my pinky. Because of this I was planning to use the 24.75 inch scale. I have guitars with the 25.5 inch scale but, there are times they just aren't that comfortable for me even though the necks on those guitars are shaped quite nicely for my meat hooks (while I have short, fat, stubby fingers the "trunk" of my hand is pretty big...especially considering everything else).
Would you happen to have a video or sound sample of your guitar online somewhere? I am curious to hear it.
Sine I plan to use a wrap-around bridge/tailpiece I won't be able to use a rod piezo. I am thinking if I took a page from your book and installed a piezo in the neck I could place one on the underside of the license place under the bridge. If I could do it the way I have in my head it may pick up different vibrations from the plate than it would from the neck.
Thanks again for all the info!
.
Thanks Yankee Dog!
I was planning to use a 1971 Michigan plate (the year I was born and where I am from...and the 71 Michigan plates were red which is my favorite color).
Because I want it to be a 6-stringer I think making a body is necessary for stability.
The first license plate guitar I saw online (have never seen one in person) was on YouTube (http://www.youtube.com/watch?feature=player_detailpage&v=ET6vS_...). It spuunded damn cool but it was only 3 strings and, as I mentioned, I want mine to be a 6-string model.
Thanks for the info David!
Would you happen to have photos or video of the ones you made?
I am planning on using a magnetic pickup but, who knows if that will change or not.
As for strings I typically use "9's" though I have found that 10's work better on my Epiphone ES-345 which has a Bigsby. Though with this project I might want to put 8's on it.
This guitar will be primarily for slide as I mentioned above. Yet, I do want to have the option of playing it the "regular" way.
I was discussing this idea with a friend tonight and he asked if it would be acoustic or electric. As I told him, it will be primarily electric but I would like for it to have a bit of acoustic quality for thise times when I don;t want to deal with plugging into an amp.
Again, thanks for the info. If you have anything else that might be useful to my project please let me know. I am the type of person that likes to have as much info as possible before I start a project like this and I am a complete novice when it comes to building instruments. I have done work on some of my instruments but, the stuff I have done is a far cry from building something from the ground up.
Thanks again!
Very nice!
I find myself wondering if I should make the body wider than the license plate to allow for more space for an acoustic sound. Or at least make the body longer than the plate so that there won;t be as much need for holes in the plate.
I want this to have a sound somewhere between acoustic and electric. That is why I'd like to leave some hollow-ness to the body. And yet, for stability reasons, I wonder if it might be better just making the thing a slab and attaching the license plate purely for aesthetics. (yes, the plate will be mostly for aesthetics no matter what but, I want to have it where the plate influences the way it vibrates)
Thanks again for the info!
I glue blocks on the inside of the box to accept the screw to hold the plate, recess the thru neck and maybe use an arch bridge to transfer vibs past the neck.
Thanks again Jawbone!
Since my plan is to use a wrap-around bridge/tailpiece I was already planning on installing a block to hold the posts that will hold the bridge. But I wasn't sure how you attached the plate (I mean specifically what you attached it to...I wasn't sure if you attached it to the frame of the box or what).
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. 15 hours ago. 4 Replies 0 Likes
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by A.D.EKER on Wednesday. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango on Tuesday. 4 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods on Saturday. 7 Replies 1 Like
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Carl Floyd Mar 1. 15 Replies 0 Likes
Started by Joe in Performances, How to Play, Lessons, Concerts. Last reply by Carl Floyd Feb 29. 13 Replies 0 Likes
Started by Chance in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Feb 22. 12 Replies 1 Like
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!