Replies to This Discussion

Permalink Reply by Randy S. Bretz on July 8, 2013 at 11:06am

Double sided tape, leather, hot glue, silicon, wood, duct tape.....should I go on.

• ▶ Reply

Permalink Reply by Ron "Oily" Sprague on July 8, 2013 at 4:28pm

I personally wouldn't wrap it in foam; however, I'm pretty sure others have done this with acceptable results. Piezos work by direct transfer of vibration. You can hot glue or silicone it directly under the bridge location on the underside of the lid, then dump more silicone or hot glue on top of that. This will indeed reduce feedback. You can also encase one in a thin wood sandwich. Or even apply it, as Randy says, with double stick tape.

• ▶ Reply

Permalink Reply by the anonymous pick on July 8, 2013 at 8:04pm

stick it to  the box   on  a bed of hot glue  .. and  then  cover in  hot glue  .

  or ..

  encase  in plastic  bag   , throw  in  trash  ,,  get  a    mag  pup   ;-)

 

• ▶ Reply

Permalink Reply by Ron "Oily" Sprague on July 9, 2013 at 3:00am

Or..

Chuck the lot into the trash bin, and buy a Swamp Witch instead!

Jeez, pick, I can't believe you missed that obvious marketing opportunity. I should get a HUGE discount on my next purchase... >:-E

• ▶ Reply

Permalink Reply by the anonymous pick on July 9, 2013 at 3:51am

;-) it's such a better     marketing ploy  when someone else says  it   for me      ;-)

hence ,,  i    baited,,  and  waited  .. 

 thanx  ;-)

muh   huh  huh  :-}

• ▶ Reply

Permalink Reply by Ron "Oily" Sprague on July 9, 2013 at 7:42am

Oh, I knew I was walking into it. So 40% off sounds about right...>:-E

• ▶ Reply

Permalink Reply by the anonymous pick on July 9, 2013 at 8:29am

;-)

 

• ▶ Reply

Permalink Reply by colin mcgrath on July 9, 2013 at 4:03am

on my two 1-stringers I sandwiched the disc in cutup pbr can. Works great so far. There is a line of mechanics tape that looks metallic like aluminum, maybe used on muffler repairs. Might try that next.

• ▶ Reply