Replies to This Discussion

Permalink Reply by Randy S. Bretz on June 27, 2013 at 3:19pm

Not exactly the right way to use a rod piezo, would of been better to slot the biscuit, lay the rod in the slot and stick the saddle on top. They work great when they have pressure on them, here it`s more like a disc picking up vibrations. You could of just used a disc under the biscuit between it and cone, or even use double sided tape and stuck a disc on the cone. Here`s a pic of how I do my rod biscuits, the rod is under the bone saddle getting pressure from the strings.

• ▶ Reply

Permalink Reply by ChickenboneJohn on June 27, 2013 at 6:52pm

Just an observation - most resos (although not all) have soundholes, as this actual allows the body to act as as a "ported chamber", and you get mid and lower frequencies projected out through the soundholes. With your set-up you are mainly getting the sound projected from the front face of the reso cone. If you make another, try soundholes, I think it does give the instrument more projection and power.

• ▶ Reply

Permalink Reply by The Phrygian Kid on June 27, 2013 at 9:06pm

Well as everyone else is giving you such a hard time ill say well done, looks great *****

• ▶ Reply

Permalink Reply by Randy S. Bretz on June 27, 2013 at 10:23pm

I wasn`t giving him a hard time, just trying to explain the proper way to use a rod, and the different ideas to amplify a reso build using piezo`s.  I always try and give advise, it`s up to them if they use it or not.

 

• ▶ Reply

Permalink Reply by Mungo Park on June 28, 2013 at 2:08pm

It is good advice, but a little praise makes it all the sweeter. Make a new biscut and gravey(hot glue ) and it will be done like dinner. I have another with sound holes, have to do a side by side for cost benifits.

                                   Cheers Ron.

• ▶ Reply