Anyone here tried using white ash for their necks? What'd you think?
I mill most of my own lumber and have piles of oak and walnut so I'm pretty familiar with them and confident of their stability as CBG necks. But, I just traded for a hundred or so board feet of white ash. Its gorgeous and dense, but how does it stand up to string pressure? Is it more likely to bend?
Only thing I know about ash is folks make baseball bats and boats out of it. Both, I guess, because it bends rather than breaks (well, until Bo Jackson breaks it over his knee).
My standard neck blank is 1-1/2" wide by 3/4" thick, carved down to round out the back. Then, I laminate on a 1/4" thick fretboard - usually either oak or walnut.
Do you think my ash necks will bend too much on a 4 string CBG?
Tags:
For what it is worth I have used yellow ash with success. However I must say the ash I have came from 2x4 studs out of a one hundred y/old house. I know the circumstance is different, but...
I have a piece here at the shop it should do fine as a neck. It would be hard to shape though it is hard as a rock. All wood bends over time nothing to do for that except a truss rod.
Laminating the fretboards on also helps them to stay straight.
You can look up the characteristics of various woods on sites like this one. Ash looks like a rather good choice. I hope this is of some help.
All the best.
John
Interesting site John I may read over in more detail one day.
Thanks guys - looks like I might have picked up a bunch of nice guitar necks! John, from that site you linked to, it looks to me that ash is very similar to the oak and walnut I'm used to, though a bit harder. Hard is good for fretboards, so I'll cut some down to check out as those, too.
Excited to have some 'sperimentin' to do.
Well, I played around with it in the shop, doing a couple of tests to see how it bent under load compared to the oak I have. It bent *slightly* more under the same load (25 lbs on a 30 inch span for 3 hours, 1 1/2" X 3/4" stock), but not enough to make me worry about using it.
So, I'm all in. I cranked out 16 necks to use for a batch of student guitars for a class at the local ArtsCenter this November. I'm very happy with the looks so far of the one I completed as a test. You can't see the ash that well in this pic, but really looks nice with just an oil finish:
Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray on Tuesday. 11 Replies 0 Likes
Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Taffy Evans on Sunday. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray Apr 26. 8 Replies 1 Like
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by Southern Ray Apr 26. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. Apr 25. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango Apr 22. 4 Replies 0 Likes
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!