Replies to This Discussion

Permalink Reply by colin mcgrath on September 30, 2012 at 10:54am

For what it is worth I have used yellow ash with success. However I must say the ash I have came from 2x4 studs out of a one hundred y/old house. I know the circumstance is different, but...

• ▶ Reply

Permalink Reply by StarrCBGs(Donovan) on September 30, 2012 at 11:01am

I have a piece here at the shop it should do fine as a neck. It would be hard to shape though it is hard as a rock. All wood bends over time nothing to do for that except a truss rod.

• ▶ Reply

Permalink Reply by StarrCBGs(Donovan) on September 30, 2012 at 11:05am

Laminating the fretboards on also helps them to stay straight.

• ▶ Reply

Permalink Reply by Roadkill a.k.a. John Maw on September 30, 2012 at 12:52pm

You can look up the characteristics of various woods on sites like this one. Ash looks like a rather good choice. I hope this is of some help.

All the best.

John

• ▶ Reply

Permalink Reply by StarrCBGs(Donovan) on September 30, 2012 at 1:13pm

Interesting site John I may read over in more detail one day.

• ▶ Reply

Permalink Reply by Madurobob on September 30, 2012 at 2:00pm

Thanks guys - looks like I might have picked up a bunch of nice guitar necks!  John, from that site you linked to, it looks to me that ash is very similar to the oak and walnut I'm used to, though a bit harder.  Hard is good for fretboards, so I'll cut some down to check out as those, too.

Excited to have some 'sperimentin' to do.

• ▶ Reply

Permalink Reply by Madurobob on October 6, 2012 at 10:49am

Well, I played around with it in the shop, doing a couple of tests to see how it bent under load compared to the oak I have.  It bent *slightly* more under the same load (25 lbs on a 30 inch span for 3 hours, 1 1/2" X 3/4" stock), but not enough to make me worry about using it.

So, I'm all in.  I cranked out 16 necks to use for a batch of student guitars for a class at the local ArtsCenter this November.  I'm very happy with the looks so far of the one I completed as a test.  You can't see the ash that well in this pic, but really looks nice with just an oil finish:

• ▶ Reply

Permalink Reply by BUGGY (C) on October 7, 2012 at 1:56am

I have used it and I feel it has a lovely sustain and sound.
And its easy to work.
Can splinter like pine though.

Seems ok with my 3 string.
Thumbs up from me
Bug

• ▶ Reply

Permalink Reply by Dan on October 7, 2012 at 2:31am

Great wood, just make sure that it is quarter sawn. I've made over 30 guitars with it, holds up straight and true very well, with or without a glued on fret board.

• ▶ Reply