#1 resource for Cigar Box Guitars, Free Plans, How-To, Parts & More!
Cigar Box Nation is sponsored by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!
Started this discussion. Last reply by Seaman Jay Sep 1, 2011. 14 Replies 0 Likes
Can someone please tell me the length from the nut to the bridge if I was making a fretless bass
Started Jul 8, 2011 0 Replies 0 Likes
Hi any CBGers out there that hail from Clarksdale Mississippi
Started this discussion. Last reply by Bruce MacMahon Jul 8, 2011. 5 Replies 0 Likes
What are the best things to use for sound holes
Gary Williams commented on smojo's group The Brits are coming
Gary Williams commented on smojo's group The Brits are coming
Gary Williams commented on smojo's group The Brits are coming
Gary Williams commented on smojo's group The Brits are coming
Gary Williams commented on smojo's group The Brits are coming
Gary Williams commented on smojo's group The Brits are coming
Gary Williams commented on Mathew Cowin's photo
Gary Williams commented on smojo's group The Brits are coming
Michael Fred Johnson left a comment for Gary Williams
Gary Williams commented on smojo's group The Brits are coming
Gary Williams commented on smojo's group The Brits are coming
Michael Fred Johnson said… Just been looking at your lap steel,It looks great Gary
jabes said… ary, is this near you? get along there if it is..
Michael Fred Johnson said… Gary'
The piece of wood on the right is the end of the neck, I had to lie on the floor to take this photo as the thing is clamped to a bench glueing the fingerboard in place.
Will send another photo when the glue has set
Michael Fred Johnson said… Gary
I've posted a couple of photos.Do you have enough depth in the box to glue a thick piece of ply to the back of the through neck ?
Michael Fred Johnson said… The pots will probably be marked A and B
Use A for volume and B for the tone
Bletherawk (Bri) said… Honoured to have you as a buddy, Gary. I need a Welsh Dragon button badge for my hat now. Back to work, get on with your practise!
Randy S. Bretz said… Cutting a rod piezo will not affect the sound, "tip" cut the rod on it`s side. There`s 2 tiny brass plates in the rod, if they touch it won`t work. I cut the 1/8" plug off the rod wire and solder it up to a regular input jack. The braided wire is the ground, you just need to fish out the plastic coated wire [ hot ] out of the braided one,an ice pick works good to do that.
Roadkill a.k.a. John Maw said… Hi Gary.
Good to have you as a friend on CBN. I will have a go at the tabs, but so far I have only played it on a double neck guitar. It shouldn't take too much to reduce it to three strings.
All the best.
John
Tony "Two Hands" Jea said… Many thanks for that its amazing what is on this site. Cheers
Posted by Harrison Withers on May 15, 2013 at 9:59pm 0 Comments 0 Likes
Posted by The Slim Panatellas on May 15, 2013 at 6:42pm 0 Comments 0 Likes
Posted by Harrison Withers on May 6, 2013 at 3:20pm 0 Comments 0 Likes
Posted by Craig Mayhem on May 6, 2013 at 9:52am 6 Comments 3 Likes
Posted by frank tennyson on May 5, 2013 at 8:30am 2 Comments 1 Like
© 2013 Created by C. B. Gitty (Ben).
Powered by
Cigar Box Nation is sponsored by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!